Paving underground

A Power Curbers 5700C machine is being used underground in Turkey to slipform the U-shaped concrete platforms on the walls of a new tunnel project.
February 14, 2012 Read time: 1 min
A 307 Power Curbers 5700C machine is being used underground in Turkey to slipform the U-shaped concrete platforms on the walls of a new tunnel project. These will house electrical conduit and serve as maintenance walkways when the tunnel is in operation.

This machine is working on a railway tunnel that forms part of a new link in Turkey's commercial centre Istanbul. This link is intended to reduce chronic traffic congestion that occurs particularly at peak periods on the crowded D100 highway that runs East-West on the Asian side of the city. The machine is working around 45m underground and has been fitted with a special 4.5tonne mould designed for this job. The job is challenging in several ways and aside from having to deliver concrete through chutes placed into the tunnel every few kilometres, securing the concrete to tunnel walls that vary in diameter has presented a real challenge. The tunnel walls are wider at train stations and then become narrower again, so Power Curbers designed a mould that can be varied hydraulically in both height and width.
Concrete milling, paving & compaction Road Structures

For more information on companies in this article

Related Content

  • Major innovations are coming to market in concrete slipforming
    March 6, 2017
    Tough competition is being seen in the specialised market for concrete slipforming machines, with new partnerships and new technology coming to market - Mike Woof writes GOMACO is boosting the versatility of its Commander slipformer further with the development of the new Three-Track Commander IIIx variant. This has been configured to cope with much tighter radii than previous versions of the Commander III, allowing it to slipform a radius of just 610mm. This suits the machine to applications such as sli
    Read More
  • New US pavers coming to market
    June 21, 2016
    Key developments are being seen in the market for US pavers, with new models being introduced by several key manufacturers - Mike Woof writes An array of new US-style paver models is now being made available on the market. Several of the main manufacturers have developed updated paver models, with new low emission engines being amongst the key upgrades being fitted. Atlas Copco has new Dynapac pavers available in the shape of its F800T tracked machine as well as the F1000T tracked and F1000W wheeled
    Read More
  • Innovative machine control systems for Canadian slipforming work
    November 29, 2013
    Advanced machine control technologies are speeding site layout and construction operations Canadian house building firm Mattamy Homes has brought in a contractor that has used sophisticated equipment to build the roads around its new development in Oakville, Ontario. The site is just 30 minutes drive from Toronto. Phase 1-A of the project is under construction and nearly every one of the 550 homes that will be built there has been sold already. Additional phases will bring the total number of homes to 1,800
    Read More
  • Concrete barrier challenge
    February 15, 2012
    The 5700C-Max unit from Power Curbers has now been used on a tricky shoulder widening job in New South Wales, Australia. The machine carried out the job close to Robertson in the Southern Highlands, about 1.5 hours drive to the south of Sydney. The job required the construction of a 200m long section of barrier, built to the requirements of the Roads and Traffic Authority (RTA). The contractor hand-formed the concrete shoulder as it was about 3m wide at the start and narrowed down to 1m at the end.
    Read More

Highlighted Content