Paving underground

A Power Curbers 5700C machine is being used underground in Turkey to slipform the U-shaped concrete platforms on the walls of a new tunnel project.
February 14, 2012 Read time: 1 min
A 307 Power Curbers 5700C machine is being used underground in Turkey to slipform the U-shaped concrete platforms on the walls of a new tunnel project. These will house electrical conduit and serve as maintenance walkways when the tunnel is in operation.

This machine is working on a railway tunnel that forms part of a new link in Turkey's commercial centre Istanbul. This link is intended to reduce chronic traffic congestion that occurs particularly at peak periods on the crowded D100 highway that runs East-West on the Asian side of the city. The machine is working around 45m underground and has been fitted with a special 4.5tonne mould designed for this job. The job is challenging in several ways and aside from having to deliver concrete through chutes placed into the tunnel every few kilometres, securing the concrete to tunnel walls that vary in diameter has presented a real challenge. The tunnel walls are wider at train stations and then become narrower again, so Power Curbers designed a mould that can be varied hydraulically in both height and width.
Concrete milling, paving & compaction Road Structures

For more information on companies in this article

Related Content

  • Egypt’s road programme is now restarting
    February 20, 2014
    Egypt is developing its road network – local reporting and images by Egypt correspondent Mohammed Elsayed Tantawy. Egypt is now gearing up its road construction activity, with a view to reducing congestion and improving traffic flow. The country’s main highway connecting capital Cairo with the port city of Alexandria has already seen a major widening programme, but other important routes are also now being upgraded and improved. The road development programme started in earnest some years ago but was delaye
    Read More
  • Formwork innovations help bridge building
    July 7, 2015
    A series of formwork developments are helping with challenging bridge construction projects around the world - Mike Woof writes In the Polish city of Krakow, a cost-effective cable stayed bridge is being constructed using a balanced cantilever technique. The current expansion of the Krakow metropolitan railway network (KST) requires the building of a crossing of the Krakow-Plaszow railway junction. Ensuring that daily rail operations remained unaffected during the construction of the 252m long crossing w
    Read More
  • Key expressway route through Hunter Valley
    November 11, 2013
    Australia’s Hunter Valley will benefit from a new high speed expressway, which is currently under construction - Simon Gould reports Located two hours north of Sydney, the Hunter Valley region in New South Wales is one of Australia’s largest producers of coal and wine. With international demand, particularly from Asia, for both continuing to increase, a significant upgrade of infrastructure was required between the region and the port of Newcastle, the world’s largest coal export port. However the strict en
    Read More
  • Trafficnow and Isbak win Istanbul contract
    May 13, 2013
    Trafficnow and Isbak are working together to provide 250 DeepBlue Sensors in Turkey’s commercial centre Istanbul. These units will be installed along all the major corridors and access points of the city and the deal also includes the DeepBlue Core centralised system. This award is of note and could help make a major contribution to taming Istanbul’s notoriously congested streets. Split between Asia and Europe, Istanbul has some 2.6 million vehicles on its road network of 25,000km as well as a population of
    Read More

Highlighted Content