Paving train innovations from Wirtgen

Wirtgen is offering innovative technology for efficient paving applications in the form of a new placer/spreader, a versatile large paver and a compact slipformer with additional features.
May 3, 2022 Read time: 2 mins
Wirtgen is offering new concrete slipforming technology

The WPS 102i placer/spreader is suited to use in applications when road surfaces and paths are paved over pre-placed steel rebar. For these duties, concrete can often only be supplied to the machine from the side and requires the need of a placer/spreader. As the leading machine in a paving train, they travel over the pre-placed steel rebar ahead of the slipform paver and the texture curing machine. A truck feeds the concrete from the side, and the placer/spreader then evenly distributes it across the entire working width. The new WPS 102i is Wirtgen’s latest addition to its range of two-track placer/spreaders. The concrete can be placed for working widths from 4-12m at thicknesses of up to 500mm. The modular machine features standard hydraulic quick-change couplings and can be quickly and easily reconfigured as the more compact WPS 62i. This ensures fast transport from job to job and maximum machine availability. The WPS 102i can be precisely controlled by stringline scanning, stringless 3D applications, or
Autopilot 2.0 from Wirtgen.

The firm is also offering SP 94i, a fully modular, 10m class inset slipform paver that can be used in a range of applications such as surfacing wide roads and highways, airport aprons, taxiways, and runways. The four track paver can also be seen fitted with the firm’s TeleMold, which allows fast and versatile alteration of the working width by up to 1m on each side, resulting in an overall increase of 2m. Short reconfiguration times mean that paving contractors can benefit from high availability and utilisation rates. In addition to the quick-change elements of the mold, the TeleMold is also equipped with a quick-change system for the metering gate and vibrator mountings. This means that crews can pave and reconfigure the working width all on the same day. The system can be fitted to SP 64i, SP 94i, and SP 124i slipform pavers.

And also new is a version of the SP 15i that features a retractable extension for the operator’s platform. This offers a better overview of the paving results, the concrete feeding system, the transfer hopper, and of the inside of the compaction chamber of the mold. In addition, the firm has developed the new Curb Depressor Mold, fitted with a hydraulically adjustable inset integrated in the mold. This is used for the construction of lowered curb profiles, such as for driveway access, which reduces the need for manual reworking.

Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Power Pavers catches the train
    November 29, 2012
    An SF-3000 machine from Power Pavers has been carrying out a paving job on Highway 218 to the north of Waterloo in the US state of Iowa. The SF-3000 machine forms part of a paving train on the project, which involved replacing and widening a section of the roadway and building new on/off ramps. The two-lane roadway has been paved to a thickness of 356mm and was paved over dowel baskets, while a key-way inserter with tie-bars was used. The job has also required the use of a Power Pavers PS-2700 placer/spread
    Read More
  • Wirtgen’s 3800 CR rips it up in San Jose
    May 16, 2017
    In California, in-situ cold recycling with a Wirtgen 3800 CR recycler has proved to be the most economical solution. In the US’s Golden State – California – Wirtgen’s 708kW powerhouse the 3800 CR recycler resurfaced 160km of San José’s main traffic arteries in situ, on-the-spot. The 3800 CR worked with a Vögele VISION 5200-2i tracked paver in a rear-load process. With this method, the 3800 CR travels in reverse, removing the damaged asphalt layers in a down-cut process and transferring the recycled material
    Read More
  • Asphalt advances and industry innovations in paving
    May 20, 2014
    Asphalt paving technology continues to develop, benefiting from new technologies and new diesel engines - Mike Woof reports The asphalt paving equipment market is seeing the introduction of new low emission engines that will meet the Tier 4 Final regulations for Europe and North America. These have required some major engineering changes, with firms now having to install bulky exhaust after-treatment systems and additional cooling for engines and turbos.
    Read More
  • Wirtgen now offers a sophisticated 3D paver control system
    January 6, 2017
    Wirtgen is introducing its latest AutoPilot Field Rover system which allows fully automatic, stringline-free concrete paving and allows jobs to be carried out more easily, quickly and economically. The system is more efficient than using conventional stringlines and is faster also and its 3D control system comprises a computer integrated into the machine and a control panel. Two GPS receivers mounted on the machine communicate with a GPS reference station on the job site. A digital terrain model is not requ
    Read More

Highlighted Content