Highway rebuild

A major contractor In Turkey is using new Dynapac pavers to resurface the busy Istanbul-Ankara highway. Onur Insaat Taahhut bought 12 new Dynapac compactors and pavers at the end of last year and is using two of its new SD135C pavers on the D-100 highway. In all 12 Dynapac asphalt paving machines and vibratory compactors were added to its fleet of equipment, and has put two of the tracked pavers to work on the Ankara to Istanbul link. The machines, four SD135C medium-sized tracked pavers, four CC524HF artic
March 21, 2012 Read time: 2 mins
A major contractor In Turkey is using new 206 Dynapac pavers to resurface the busy Istanbul-Ankara highway.

Onur Insaat Taahhut bought 12 new Dynapac compactors and pavers at the end of last year and is using two of its new SD135C pavers on the D-100 highway. In all 12 Dynapac asphalt paving machines and vibratory compactors were added to its fleet of equipment, and has put two of the tracked pavers to work on the Ankara to Istanbul link.

The machines, four SD135C medium-sized tracked pavers, four CC524HF articulated tandem rollers and four CA282D medium-range vibratory soil compactors, were supplied through Dynapac's distributor for Turkey, 2977 Teknomak Makina. Two of the units were sent to resurface a 30 km stretch of the D-100 highway between Bolu and Gerede, midway between Istanbul and Ankara. The main route between Istanbul and Ankara is the E-80, and this is closely paralleled by the smaller but busy D-100.

Onur's contract involves resurfacing of both 9.6m wide carriageways on a 30km length of the D-100, the contractor working on one carriageway at a time, closing a stretch of about 1km to cause the least disruption to the traffic. The two SD135C units have a maximum working width of 10m and are being used to place an asphalt course that has a final thickness of 140mm, the compaction being carried out by two existing Dynapac CC524HF compactors from Onur's fleet. The firm is laying and compacting of 15,500tonnes of asphalt/day on this project.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Innovative asphalt paver advances for 2015
    April 8, 2015
    Pressure on asphalt paver manufacturers to develop new and more efficient machines is bringing results - Mike Woof writes. For all the key manufacturers in the asphalt paving segment, pressure is being brought to bear with regard to the development of new and more efficient machines. Both for US and European style of pavers, incremental improvements are being seen in machines. In keeping with regulations for Europe and North America, many of the new generation machines are now being powered by the latest lo
    Read More
  • Wirtgen’s 3800 CR rips it up in San Jose
    May 16, 2017
    In California, in-situ cold recycling with a Wirtgen 3800 CR recycler has proved to be the most economical solution. In the US’s Golden State – California – Wirtgen’s 708kW powerhouse the 3800 CR recycler resurfaced 160km of San José’s main traffic arteries in situ, on-the-spot. The 3800 CR worked with a Vögele VISION 5200-2i tracked paver in a rear-load process. With this method, the 3800 CR travels in reverse, removing the damaged asphalt layers in a down-cut process and transferring the recycled material
    Read More
  • Cat paves the way in Portugal
    June 22, 2012
    Caterpillar pavers were used recently to help improve drainage on a vital road into a popular tourist destination in Portugal. The Avenida Marginal is the main road access into Cascais, a village with historic hotels, winding roads and stunning views of the Atlantic Ocean attracting thousands of holidaymakers each year. However, the highway had been suffering from poor draining resulting in rivulets being formed in heavy rain, making travelling hazardous for cars and pedestrians alike.
    Read More
  • Airport runway rebuild at Bologna
    May 15, 2019
    Rebuilding a runway requires special attention to detail to maximise efficiency and safety Airport runways face special challenges with regard to the loads they carry on a daily basis, particularly when aircraft are landing. A modern jet aircraft will typically land at speeds of around 240-260km/h, with a laden 747 weighing as much as 265tonnes at the end of a long flight. The stresses these large aircraft place on runway surfaces are enormous and not just with the massive impact forces exerted during
    Read More

Highlighted Content