Dynapac machines used for RCC paving in Germany

Paving machines from Dynapac were used recently to install roller-compacted concrete (RCC) in Germany. The job was carried out in cooperation with the firm’s long-term customer STRA-LA-BAU, based in Dortmund, Germany. The German contractor STRA-LA-BAU has several Dynapac pavers in its fleet, including DF45CS, F1200CS and F1700C models, as well as Dynapac rollers. The firm laid the RCC surface on behalf of Holcim. There is an external warehouse planned on which heavy machine parts for the packaging indust
August 10, 2018 Read time: 2 mins
Paving machines from Dynapac were used recently to install roller-compacted concrete (RCC) in Germany. The job was carried out in cooperation with the firm’s long-term customer STRA-LA-BAU, based in Dortmund, Germany.


The German contractor STRA-LA-BAU has several 206 Dynapac pavers in its fleet, including DF45CS, F1200CS and F1700C models, as well as Dynapac rollers.

The firm laid the 1074 RCC surface on behalf of 2813 Holcim. There is an external warehouse planned on which heavy machine parts for the packaging industry will be stored. The site’s use means that high point loads are to be expected – a condition in which conventional asphalt mixes often reach their limit.

To ensure the job was carried out properly, STRA-LA-BAU worked closely with  Dynapac and the firm’s specialist, Michael Heid. Dynapac advised on suitable machine settings and helped devise a methodology for the job. Necessary features included high precompaction from the screed and the production of a homogenous surface structure for the concrete. To handle the job, the firm selected a Dynapac SD2500CS paver with its high compaction V5100 TVH screed.

The SD2500CS machine showed itself to be sufficiently manoeuvrable to handle the 60m paving lengths. The Dynapac high compaction screed delivered a constant installation thickness of around 140mm in the binder course and 100mm in the top course. In addition to the effective precompaction by the screed, the surface was also produced with a high-quality finish.

The firm then used 12tonne CP 1200 rollers from Dynapac for final compaction, with concrete trowels then employed to deliver the final finish.

Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Prized recycling
    June 13, 2012
    Wirtgen has won the US Cold Recycling Award 2012 for applying its cold recycling structural road rehabilitation technology on Interstate I-81 in eastern America. The I-81 is one of the major north-south routes running across Virginia state with two lanes in each direction. Increasing traffic volumes and the loads imposed by heavy-vehicle traffic were said by the Virginia Department of Transportation (VDOT) to have left the pavement surface covered with alligator cracks, wheel ruts and patches where minor re
    Read More
  • Podium finish for Indonesia’s new racetrack paver
    November 23, 2021
    The first machines to complete a circuit of Indonesia’s new Mandalika International motorsport track were a series of Bomag pavers and rollers. They can claim a best-in-class finish when it comes to creating the ultimate surface for a competitive racing track.
    Read More
  • A road challenge for Zimbabwe
    November 8, 2023
    Construction work is finally underway for a major new highway link in Zimbabwe after many years of false starts.
    Read More
  • Tunnelling challenge on German project
    June 13, 2012
    A massive construction project has been underway deep in the heart of the Schnecktal valley area in Germany. From the surface, though, you would never be able to tell. The majority of the work is underground, as a joint-venture team led by German contractor Wayss and Freytag Ingenieurbau builds the nearly 7km long Finne Tunnel. After a few years of tunnel boring operations, the contractor is at work finishing the interior of the tunnel, slipforming first the tunnel’s floor and then a walkway with its GOMACO
    Read More

Highlighted Content