Dynapac machines used for RCC paving in Germany

Paving machines from Dynapac were used recently to install roller-compacted concrete (RCC) in Germany. The job was carried out in cooperation with the firm’s long-term customer STRA-LA-BAU, based in Dortmund, Germany. The German contractor STRA-LA-BAU has several Dynapac pavers in its fleet, including DF45CS, F1200CS and F1700C models, as well as Dynapac rollers. The firm laid the RCC surface on behalf of Holcim. There is an external warehouse planned on which heavy machine parts for the packaging indust
August 10, 2018 Read time: 2 mins
Paving machines from Dynapac were used recently to install roller-compacted concrete (RCC) in Germany. The job was carried out in cooperation with the firm’s long-term customer STRA-LA-BAU, based in Dortmund, Germany.


The German contractor STRA-LA-BAU has several 206 Dynapac pavers in its fleet, including DF45CS, F1200CS and F1700C models, as well as Dynapac rollers.

The firm laid the 1074 RCC surface on behalf of 2813 Holcim. There is an external warehouse planned on which heavy machine parts for the packaging industry will be stored. The site’s use means that high point loads are to be expected – a condition in which conventional asphalt mixes often reach their limit.

To ensure the job was carried out properly, STRA-LA-BAU worked closely with  Dynapac and the firm’s specialist, Michael Heid. Dynapac advised on suitable machine settings and helped devise a methodology for the job. Necessary features included high precompaction from the screed and the production of a homogenous surface structure for the concrete. To handle the job, the firm selected a Dynapac SD2500CS paver with its high compaction V5100 TVH screed.

The SD2500CS machine showed itself to be sufficiently manoeuvrable to handle the 60m paving lengths. The Dynapac high compaction screed delivered a constant installation thickness of around 140mm in the binder course and 100mm in the top course. In addition to the effective precompaction by the screed, the surface was also produced with a high-quality finish.

The firm then used 12tonne CP 1200 rollers from Dynapac for final compaction, with concrete trowels then employed to deliver the final finish.

Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Stepless spraying up to 7m with Dynapacs SD2500CS PROTAC Spray Paver
    April 11, 2024
    Efficiency goes hand in hand with intelligence in the Dynapac SD2500CS PROTAC Spray Paver. The PROTAC brings two processes together in one machine and in a single operation: paving and spraying. It applies simultaneously a layer of tack coat emulsion and a layer of asphalt. This not only saves time and therefore costs, but also increases the pavement quality.
    Read More
  • Latest bitumen mixes improve roads, reduce noise
    February 14, 2012
    Special bitumen mixes and machines are capable of improving the service life of roads and reducing noise. Mike Woof and Patrick Smith report. The need to improve traffic flow in an important part of the City of Poznan, Poland, led to the decision to build a new 1.13km long dual carriageway.
    Read More
  • BOMAG joins innovative repair
    February 6, 2012
    A durable and cost-efficient method of road rehabilitation has been carried out on a local road in Germany using an innovative cold recycling technology.
    Read More
  • Innovations are pushing boundaries in the concrete road paving sector
    February 18, 2013
    The concrete road paving market continues to develop - Mike Woof reports Concrete road paving technology continues to evolve, with new equipment and techniques coming to market. Although concrete road construction has been used for many years, problems with early generation technologies affected this market segment. The first concrete roads were constructed in sections, which led to problems at joints but these were addressed many years ago with the advent of slipform paving. Concrete roads constructed in t
    Read More

Highlighted Content