Skip to main content

Concrete paving precision achieved

A Wirtgen SP 62i slipformer has been used for the cost-effective paving of concrete slab in the US state of Texas. The machine has been utilised for construction work in College Station, a town some 150km northwest of Houston, Texas.
August 15, 2019 Read time: 2 mins
A Wirtgen SP 62i slipformer has been used to build roads on the site of a former race circuit in Texas

The contractor used the SP 62i to pave new lanes on the site of the former Texas World Speedway race circuit.

The site of the race circuit is now being redeveloped to make way for housing and more than 76,000m³ of road will be needed there for the new Southern Pointe residential area. This is being built over an area of 2.6km² over the next 12 years.

In College Station, construction activities began at the south entrance of the new residential area. The inset paver paved the concrete on a lime-stabilised sub-base over a length of 67m in two passes, 11.5 m wide, 200mm thick, and with a crown of 3%.

Larry Young Paving opted for the compact SP 62i model because the machine’s low noise and emissions suit the urban applications in which the contractor carries out most of its work. This compact, two track machine suits paving widths from 3.5m to 7.5m and can handle thicknesses of up to 450mm. However, special paving widths, thicknesses, and options are available if required.

In College Station, construction activities began at the south entrance of the new residential area. The inset paver paved the concrete on a lime-stabilised sub-base over a length of 67m in two passes, 11.5 m wide, 200mm thick, and with a crown of 3%.

For more information on companies in this article

Related Content

  • Peru’s Matarani – Punta de Bonbon Highway
    January 5, 2016
    A major new highway project in Peru will improve connectivity for the Arequipa region - Mauro Nogarin writes Peru’s Matarani-Bonbon road project is an important route and forms part of the Camana - Dv Quilca - Ilo - Tacna highway project. The road stretches through several provinces in the Arequipa region. The deadline for completing the work is 720 days after January 2015, and it is scheduled to be completed by December 2016. Progress has been good and as of July 2015, it was 80% completed. The main
  • Improved airport for Thimarafushi atoll
    August 29, 2014
    Thimarafushi forms part of the Thaa Atoll lying in the Indian Ocean but access has been limited in the past. However the construction of a new airport planned by the Maldives Government will help develop the tourist trade, boosting the local economy. Most visitors previously used the country’s two international airports, using these as hubs for flights to the country’s six domestic airports. This has limited travel to only a few of the country’s 1,192 islands, of which around 200 are inhabited. As a result,
  • Stable site
    July 23, 2012
    A Wirtgen soil stabilisation machine has been treating a 100,000m2 site in Staffordshire for an advanced logistics centre, a project including access roads and parking areas. The WR2500S recycler is being used to prepare the way for the vast Blue Planet complex in Chatterley Valley, Newcastle-under-Lyme. Throughout the preliminary groundworks the Wirtgen machine, purchased by Barton Plant of Kettering, Northamptonshire, has placed between 6-7,000m2/day of lime/cement stabilised earth on the project, for mai
  • Rural Czech roads get paving upgrade
    November 2, 2012
    A series of rural road rebuilds have improved transport connections in the Czech Republic, helping to boost connectivity and the local economy The roads around Brandýs nad Labem, some 25km to the southwest of Czech capital Prague are crucial arteries to the rural and agricultural areas of the country. An assessment by regional authorities indicated that these roads are in need of repair. That led to cold planing and paving work on a series of rural roads near Brandýs nad Labem. The regional authorities had