Skip to main content

Concrete paving precision achieved

A Wirtgen SP 62i slipformer has been used for the cost-effective paving of concrete slab in the US state of Texas. The machine has been utilised for construction work in College Station, a town some 150km northwest of Houston, Texas.
August 15, 2019 Read time: 2 mins
A Wirtgen SP 62i slipformer has been used to build roads on the site of a former race circuit in Texas

The contractor used the SP 62i to pave new lanes on the site of the former Texas World Speedway race circuit.

The site of the race circuit is now being redeveloped to make way for housing and more than 76,000m³ of road will be needed there for the new Southern Pointe residential area. This is being built over an area of 2.6km² over the next 12 years.

In College Station, construction activities began at the south entrance of the new residential area. The inset paver paved the concrete on a lime-stabilised sub-base over a length of 67m in two passes, 11.5 m wide, 200mm thick, and with a crown of 3%.

Larry Young Paving opted for the compact SP 62i model because the machine’s low noise and emissions suit the urban applications in which the contractor carries out most of its work. This compact, two track machine suits paving widths from 3.5m to 7.5m and can handle thicknesses of up to 450mm. However, special paving widths, thicknesses, and options are available if required.

In College Station, construction activities began at the south entrance of the new residential area. The inset paver paved the concrete on a lime-stabilised sub-base over a length of 67m in two passes, 11.5 m wide, 200mm thick, and with a crown of 3%.

For more information on companies in this article

Related Content

  • Rubber tyred rollers see key developments
    June 23, 2015
    A series of new rubber tyred asphalt compactors are now coming to market from several key manufacturers - Mike Woof writes Several of the major European compactor manufacturers are introducing new rubber tyred machines to meet demand. Pneumatic tyred rollers are often used for finishing work in road construction, due to the high quality surface they can deliver. For a time development of these machines stalled but in recent years there has been a resurgence of interest in their use. Contractors have reali
  • Fast roller paver from Terex
    October 12, 2012
    Terex says that its latest Bid-Well 6500 Automatic Roller Paver delivers high performance concrete paving for slabs up to 610mm thick. The machine benefits from a heavy-duty frame design and an 8.9tonne operating weight in standard form. The frame can be configured to meet paving widths from 7.3-18.3m wide, suiting applications in a range of duties including airport runways, taxiways and aprons. Capable of width changes in a matter of hours, the roller paver offers an alternative to slipform pavers for thes
  • Caterpillar meets the challenges
    February 14, 2012
    Roads in south-eastern France and those on the west coast of Spain share a common challenge often faced by road construction crews around Europe: extremely tight working conditions. According to Caterpillar, such conditions create construction demands that can affect traffic flow, the preservation of historic structures and even the ability to resurface these narrow roads that, in some cases, have been around for centuries. Add to these challenging working conditions, the mountainous terrain found in the Al
  • Runway resurfacing in Sardinia with Wirtgen machines
    December 7, 2017
    The fleet used comprised two Wirtgen W 210s and one W 200i, as well as two Wirtgen WR 2000 soil stabilisers. Located roughly 8 km north-west of the city of Alghero, Alghero-Fertilia Airport is one of three commercial airports on the Italian island, along with Cagliari Elmas and Olbia. Built as a military airport in the late 1930s, Alghero-Fertilia still occasionally handles military aircraft. However commercial flights represent its main traffic and as it serves the provinces of Sassari and Oristano, it is