Chicago Pneumatic’s new concrete stars

Chicago Pneumatic (CP) has unveiled its comprehensive new concrete equipment range. In applications from walls to floor slabs, the range has products to cover every step of the job, from vibration and levelling to finishing and cutting. Freshly poured concrete has air voids which must be removed by vibration to increase its density and finished strength. Depending on the concrete’s depth and slump, this can be achieved using a poker or screed. Customers can now choose mechanical, electric or pneumatic p
May 14, 2014 Read time: 3 mins
6097 Chicago Pneumatic (CP) has unveiled its comprehensive new concrete equipment range. In applications from walls to floor slabs, the range has products to cover every step of the job, from vibration and levelling to finishing and cutting.

Freshly poured concrete has air voids which must be removed by vibration to increase its density and finished strength. Depending on the concrete’s depth and slump, this can be achieved using a poker or screed. Customers can now choose mechanical, electric or pneumatic pokers from CP to best meet their specific application and concrete type.

The new durable and user-friendly VPM mechanical pokers are ideal for mid-sized construction sites using medium-to-high slump concrete. VPE electric pokers are ideal where low noise, low maintenance, light pokers are required. They offer fast start-up, a wide action radius and rapid acceleration for medium-to-high slump concrete. For jobs of any size with low-to-high-slump concrete requiring high-speed vibration, the VPP pneumatic poker range delivers high-performance centrifugal force. With compressed-air cooling and low maintenance, these pokers are said to be highly dependable even in the most remote locations.

The CP poker range is fully complemented by a wide selection of portable power sources. Mechanical pokers have a choice of gasoline or diesel drive units with rugged construction, rubber mountings to reduce vibration and noise, and quick-release couplings.

CP’s new concrete product line includes walk-behind screeds that provide a consistent, even surface without any guide or supporting tube. Equipped with reliable 2288 Honda engines, they offer reduced hand-arm vibration, with an easily-accessible ignition switch and throttle control for quick adjustments. The LBG 1200 hand-held screed provides surface vibration only; it is suitable for slabs of all types and concrete of all consistencies. Recommended for smaller slabs and medium-to-low slump concrete, the LBG 800 bull float screed provides deeper vibration and single-step levelling.

Screeding time, labour and transport costs can also be cut with the CP CombiForm lightweight, leave-in-place screed rail system. CombiForm is easily prepared and cast into the concrete, providing an efficient levelling solution.

CP’s STG power trowels are ideal where smoother finished surfaces are essential. The STG 24 is a small power float edger intended for smaller slabs and finishing edges, especially in confined spaces and by walls. STG 36 and 46 are higher capacity trowels designed for larger slabs.

Completing the range are concrete and asphalt floor saws that deliver a straight, stable cut for expansion joints, to a maximum depth of 15cm. They can also cut asphalt for road maintenance, or act as a jack hammer alternative.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Dynapac is broadening its range for asphalt paving
    April 1, 2014
    Atlas Copco’s Dynapac brand is launching new models aimed at the asphalt paving market - Mike Woof reports Atlas Copco’s Dynapac brand looks set to boost its worldwide presence in the road construction market, with new asphalt paving products forming a major segment of the firm’s improved portfolio. The launch of new pavers and an improved material feeder comes at a busy time for the Dynapac brand. When Dynapac was first acquired by Atlas Copco the business was left separate initially, however it has now
    Read More
  • Volvo’s L45H and L50H are fully loaded for all-round performance
    March 16, 2016
    The new L45H and L50H wheel loaders from Volvo Construction Equipment are well balanced machines, built to a solid design that ensures the strongest performance even in confined jobsites. The H-series wheel loaders have Volvo’s Torque Parallel (TP) linkage to deliver high breakout torque and excellent parallel movement throughout the lifting range. A long wheel base, low center of gravity and good weight distribution give the machine superior stability on rough and uneven terrain. A robust, compact d
    Read More
  • Dynapac’s high capacity asphalt paver
    September 30, 2013
    Dynapac is now offering the SD2550CS tracked paver, which is said to deliver high productivity and efficiency at a low cost/tonne. The machine is also fitted with Dynapac’s latest intelligent Pave Manager 2.0 control system, further boosting mat quality. The company says that the paver has benefited from an intensive research and development programme and the R&D team has worked hard to improve a number of features on the new paver, which now has an improved operator work station and controls systems, lo
    Read More
  • Underground routes for highways
    July 20, 2012
    Increasingly, and where possible, roads are being built in tunnels often for environmental reasons, writes Patrick Smith As part of the new M7 motorway development in the southwest of Ireland, the four-lane route crosses the River Shannon near Limerick, before it flows into the Atlantic. Centrepiece of the 10km long Limerick Southern Ring Road is the required tunnelling (675m long), which including the north and south entrance and exit ramps, means it will be 915m long. Completion of the work is planned for
    Read More

Highlighted Content