Chicago Pneumatic’s new concrete stars

Chicago Pneumatic (CP) has unveiled its comprehensive new concrete equipment range. In applications from walls to floor slabs, the range has products to cover every step of the job, from vibration and levelling to finishing and cutting. Freshly poured concrete has air voids which must be removed by vibration to increase its density and finished strength. Depending on the concrete’s depth and slump, this can be achieved using a poker or screed. Customers can now choose mechanical, electric or pneumatic p
May 14, 2014 Read time: 3 mins
6097 Chicago Pneumatic (CP) has unveiled its comprehensive new concrete equipment range. In applications from walls to floor slabs, the range has products to cover every step of the job, from vibration and levelling to finishing and cutting.

Freshly poured concrete has air voids which must be removed by vibration to increase its density and finished strength. Depending on the concrete’s depth and slump, this can be achieved using a poker or screed. Customers can now choose mechanical, electric or pneumatic pokers from CP to best meet their specific application and concrete type.

The new durable and user-friendly VPM mechanical pokers are ideal for mid-sized construction sites using medium-to-high slump concrete. VPE electric pokers are ideal where low noise, low maintenance, light pokers are required. They offer fast start-up, a wide action radius and rapid acceleration for medium-to-high slump concrete. For jobs of any size with low-to-high-slump concrete requiring high-speed vibration, the VPP pneumatic poker range delivers high-performance centrifugal force. With compressed-air cooling and low maintenance, these pokers are said to be highly dependable even in the most remote locations.

The CP poker range is fully complemented by a wide selection of portable power sources. Mechanical pokers have a choice of gasoline or diesel drive units with rugged construction, rubber mountings to reduce vibration and noise, and quick-release couplings.

CP’s new concrete product line includes walk-behind screeds that provide a consistent, even surface without any guide or supporting tube. Equipped with reliable 2288 Honda engines, they offer reduced hand-arm vibration, with an easily-accessible ignition switch and throttle control for quick adjustments. The LBG 1200 hand-held screed provides surface vibration only; it is suitable for slabs of all types and concrete of all consistencies. Recommended for smaller slabs and medium-to-low slump concrete, the LBG 800 bull float screed provides deeper vibration and single-step levelling.

Screeding time, labour and transport costs can also be cut with the CP CombiForm lightweight, leave-in-place screed rail system. CombiForm is easily prepared and cast into the concrete, providing an efficient levelling solution.

CP’s STG power trowels are ideal where smoother finished surfaces are essential. The STG 24 is a small power float edger intended for smaller slabs and finishing edges, especially in confined spaces and by walls. STG 36 and 46 are higher capacity trowels designed for larger slabs.

Completing the range are concrete and asphalt floor saws that deliver a straight, stable cut for expansion joints, to a maximum depth of 15cm. They can also cut asphalt for road maintenance, or act as a jack hammer alternative.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Wacker’s latest skid steer offers increased performance
    June 14, 2017
    From Germany, Wacker Neuson recently launched a new line of medium-frame skid steer and compact track loaders that the company says are ideal for a variety of applications. The four new skid steer and two new compact track loaders have hinge pin height on the vertical loaders to provide maximum loading and unloading capabilities. For example, pin height for the SW16 wheel skid steer is 300cm while for the ST31 radial lift track model is nearly 319cm. An engine torque of 300Nm provides the power needed for i
    Read More
  • Mullum Mullum Valley untouched by progress
    July 20, 2012
    Preserving the unspoiled Mullum Mullum Valley was the major consideration when deciding to build a traffic tunnel The answer to one of the major issues facing construction of the A$2.5 billion EastLink route in Australia was simple: construct a tunnel. While it was expensive, those involved realised they had little option but to go underground to protect the environmentally sensitive Mullum Mullum Valley, an untouched area of wood and bushland in Melbourne. EastLink, the 39km toll road project on the easter
    Read More
  • Liebherr demonstrates deep foundation knowledge
    March 8, 2017
    At CONEXPO CON/AGG 2017, Liebherr is showcasing its range of machines for the deep foundation industry including the piling rig LRH 600 and the piling and drilling rig LRB 355. Both machines have been especially adapted according to US requirements, and are premiering in North America.
    Read More
  • New crushing and screening developments abounded at Hillhead
    October 3, 2014
    A wide array of crushing, screening and materials handling technologies have been introduced in recent months - Mike Woof writes The manufacturers of crushing and screening products have been developing an array of new systems to optimise production. The recent Hillhead show in the UK was the launch point for a number of these new products, although firms from all over the world have also been developing new designs. Productivity and wear life are two performance factors seeing major benefits from innovatio
    Read More

Highlighted Content