Skip to main content

Bridge work is no problem for Terex concrete paver Bid-Well 3600

Terex says that its Bid-Well 3600 automatic paver roller is flexible enough to deliver high-quality paving for both slab-on-grade and bridge applications. Meeting a variety of inline paving and skewed bridge designs, the 3600 paver offers standard paving width configurations from 2.4-26.2m with on-the-fly paving widths changes of up to 9.1m. It quickly adapts to the contractor’s bridge deck placement and slab-on-grade paving needs. Kraemer North America recently used an MLC300 to help replace an 84-ye
May 30, 2018 Read time: 2 mins
A barge-mounted Manitowoc MLC300 at work on the new 750m-long Dale Gardner Veterans Memorial Bridge in Illinois
1222 Terex says that its Bid-Well 3600 automatic paver roller is flexible enough to deliver high-quality paving for both slab-on-grade and bridge applications.

Meeting a variety of inline paving and skewed bridge designs, the 3600 paver offers standard paving width configurations from 2.4-26.2m with on-the-fly paving widths changes of up to 9.1m. It quickly adapts to the contractor’s bridge deck placement and slab-on-grade paving needs.

Available inserts transition paver frame depth from 914-1,219mm at the centre to extend paving widths to 33.5m. For paving skewed bridge decks, the 3600 has a universal power crown adjuster that can be set for paving inline or offset to an adjacent hinge point opposite the other for quickly adjusting the crown when paving at a skew.

Terex says that the machine’s legs adapt to meet any challenge thanks to powered leg-height adjustments of up to 1,168mm. For paving at cross-slopes greater than 4%, the pivot leg configuration adjusts the paver to a true vertical operating position to reduce side forces placed on the rail and eliminate additional shoring. The swing-leg design delivers zero-clearance paving when working in tight applications, such as rehabilitation work and deck overlays.

Its available six-wheel-bogie leg option spreads machine weight over a wider area to lessen the load on the overhang brackets.

Meanwhile, new orange strobe lights positioned at the corners of the paver’s frame alert workers and nearby traffic when the machine is paving to enhance operating safety.

The integrated Terex Bid-Well LED lighting system decreases the harsh shadows thrown by tower lights, allowing finishers to deliver a high-quality final product. Up to 12 LED lights can be positioned anywhere on the machine. Up to four lights can be mounted directly onto the paving carriage to illuminate the paver.

The 3600 paver’s carriage incorporates a segmented upper and lower section to

For more information on companies in this article

Related Content

  • Safer cone collection with X-Cone among the latest safety innovations
    August 30, 2017
    X-Cone is a new traffic cone management system offering a higher level of safety for workers and maximum efficiency for contractors. Austrian-made X-Cone is a truck-mounted system that can manage the setting out and collection of cones from the flatbed of any 3.5tonne vehicle. It does not matter if the cones are straight or laying on the road, the X-cone can still manage the work quickly, safely and reliably, according to the manufacturer. For setting out standard cones, the driver can decide the distance b
  • US highway rebuild uses hard-wearing asphalt
    July 18, 2012
    Guntert & Zimmerman equipment is being used to create a new hard-wearing asphalt surface on a key Interstate highway in the US state of Kansas as Mike Woof reports A busy Interstate highway in the US is now benefiting from a new, long-lasting surface. The road, Interstate 70 in Western Kansas, was in need of resurfacing. The full-depth asphalt roadway, up to 508mm thick in certain sections, had reached the end of its working life.
  • Far from formulaic
    January 4, 2013
    Formwork solutions for the first axial suspension cable stayed bridge in India; and a four-lane road bridge in Germany’s Harz Mountains, are among the latest bridge-based formwork projects analysed by Guy Woodford. RMD Kwikform India has won the contract to design and supply shoring and formwork solutions for the first axial suspension cable stayed bridge ever built in India. The Kota Bridge’s innovative design sees a single 350m span cross the entire width of the Chambal River, with three approach spans on
  • Vögele’s bespoke Chinese paver
    January 6, 2017
    The Vögele road paver SUPER 1800-2 HD has been specially developed to meet the requirements of road construction in China. This heavy-duty machine can be used for placing cold, coarse-grained materials such as cement-treated base (CTB). The paver is designed to cope with the abrasive wear caused by these mixes, increasing its durability. Its SB300HD fixed-width screed is also designed for roadbase applications. It allows thick layers to be paved true to line and level with a maximum degree of pre-compacti