Skip to main content

Bridge work is no problem for Terex concrete paver Bid-Well 3600

Terex says that its Bid-Well 3600 automatic paver roller is flexible enough to deliver high-quality paving for both slab-on-grade and bridge applications. Meeting a variety of inline paving and skewed bridge designs, the 3600 paver offers standard paving width configurations from 2.4-26.2m with on-the-fly paving widths changes of up to 9.1m. It quickly adapts to the contractor’s bridge deck placement and slab-on-grade paving needs. Kraemer North America recently used an MLC300 to help replace an 84-ye
May 30, 2018 Read time: 2 mins
A barge-mounted Manitowoc MLC300 at work on the new 750m-long Dale Gardner Veterans Memorial Bridge in Illinois
1222 Terex says that its Bid-Well 3600 automatic paver roller is flexible enough to deliver high-quality paving for both slab-on-grade and bridge applications.

Meeting a variety of inline paving and skewed bridge designs, the 3600 paver offers standard paving width configurations from 2.4-26.2m with on-the-fly paving widths changes of up to 9.1m. It quickly adapts to the contractor’s bridge deck placement and slab-on-grade paving needs.

Available inserts transition paver frame depth from 914-1,219mm at the centre to extend paving widths to 33.5m. For paving skewed bridge decks, the 3600 has a universal power crown adjuster that can be set for paving inline or offset to an adjacent hinge point opposite the other for quickly adjusting the crown when paving at a skew.

Terex says that the machine’s legs adapt to meet any challenge thanks to powered leg-height adjustments of up to 1,168mm. For paving at cross-slopes greater than 4%, the pivot leg configuration adjusts the paver to a true vertical operating position to reduce side forces placed on the rail and eliminate additional shoring. The swing-leg design delivers zero-clearance paving when working in tight applications, such as rehabilitation work and deck overlays.

Its available six-wheel-bogie leg option spreads machine weight over a wider area to lessen the load on the overhang brackets.

Meanwhile, new orange strobe lights positioned at the corners of the paver’s frame alert workers and nearby traffic when the machine is paving to enhance operating safety.

The integrated Terex Bid-Well LED lighting system decreases the harsh shadows thrown by tower lights, allowing finishers to deliver a high-quality final product. Up to 12 LED lights can be positioned anywhere on the machine. Up to four lights can be mounted directly onto the paving carriage to illuminate the paver.

The 3600 paver’s carriage incorporates a segmented upper and lower section to

For more information on companies in this article

Related Content

  • Dual layer, hot to hot paving at German airport
    August 18, 2015
    An airport in Germany has seen the use of very innovative asphalt paving techniques, with the use of dual-layer, hot-to-hot working. The method was used to meet a very tight schedule for the runway rebuilding work, while also delivering the high quality required. Two InLine Pave trains from Vögele were used at Rostock-Laage Airport to lay a new surface and binder course. The operation was innovative as the process used both hot-to-hot, echelon paving as well as dual layer, hot-on-hot working. Using this
  • Atlas Copco adds three LED models to HiLight tower range
    December 15, 2017
    Atlas Copco has expanded its HiLight tower range with the launch of three advanced LED plug-and-light models - P2+ as well as the V2+ and V3+. The company said that all three models can be powered directly from an auxiliary power source, the grid or a portable generator. They need minimum maintenance and feature easy portability. The manufacturer said that they are ideal for illuminating outdoor events anywhere in the world, the HiLight P2+ floodlight provides 360-degree coverage across a 2,000m²
  • Novel drilling system from Minnich
    March 17, 2016
    Minnich Manufacturing has expanded its product range with a series of new models that offer additional capabilities. One of these is a special application drill designed for pinning temporary concrete barriers that separate traffic from work zones. The drill is said to save time and cost by eliminating the need for multiple workers to drill holes by hand. The barrier-mounted drill is designed to ride along the top of the wall and can drill three holes simultaneously. The self-propelled machine runs off a
  • Pre-stressed bridge decks use modular formwork system
    July 9, 2012
    Imaginative formwork, often using modular components, is helping to shape some challenging bridges worldwide. Patrick Smith reports Traffic volumes in and around Prague have swollen massively in recent years, pushing the existing road network to the limits of its capacity. To permanently ease congestion in the Czech capital's centre, a multi-lane orbital motorway is under construction as a high capacity bypass for central Prague and to link up all the motorways and other major highways radiating from the ci