Bridge work is no problem for Terex concrete paver Bid-Well 3600

Terex says that its Bid-Well 3600 automatic paver roller is flexible enough to deliver high-quality paving for both slab-on-grade and bridge applications. Meeting a variety of inline paving and skewed bridge designs, the 3600 paver offers standard paving width configurations from 2.4-26.2m with on-the-fly paving widths changes of up to 9.1m. It quickly adapts to the contractor’s bridge deck placement and slab-on-grade paving needs. Kraemer North America recently used an MLC300 to help replace an 84-ye
May 30, 2018 Read time: 2 mins
A barge-mounted Manitowoc MLC300 at work on the new 750m-long Dale Gardner Veterans Memorial Bridge in Illinois
1222 Terex says that its Bid-Well 3600 automatic paver roller is flexible enough to deliver high-quality paving for both slab-on-grade and bridge applications.

Meeting a variety of inline paving and skewed bridge designs, the 3600 paver offers standard paving width configurations from 2.4-26.2m with on-the-fly paving widths changes of up to 9.1m. It quickly adapts to the contractor’s bridge deck placement and slab-on-grade paving needs.

Available inserts transition paver frame depth from 914-1,219mm at the centre to extend paving widths to 33.5m. For paving skewed bridge decks, the 3600 has a universal power crown adjuster that can be set for paving inline or offset to an adjacent hinge point opposite the other for quickly adjusting the crown when paving at a skew.

Terex says that the machine’s legs adapt to meet any challenge thanks to powered leg-height adjustments of up to 1,168mm. For paving at cross-slopes greater than 4%, the pivot leg configuration adjusts the paver to a true vertical operating position to reduce side forces placed on the rail and eliminate additional shoring. The swing-leg design delivers zero-clearance paving when working in tight applications, such as rehabilitation work and deck overlays.

Its available six-wheel-bogie leg option spreads machine weight over a wider area to lessen the load on the overhang brackets.

Meanwhile, new orange strobe lights positioned at the corners of the paver’s frame alert workers and nearby traffic when the machine is paving to enhance operating safety.

The integrated Terex Bid-Well LED lighting system decreases the harsh shadows thrown by tower lights, allowing finishers to deliver a high-quality final product. Up to 12 LED lights can be positioned anywhere on the machine. Up to four lights can be mounted directly onto the paving carriage to illuminate the paver.

The 3600 paver’s carriage incorporates a segmented upper and lower section to
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Gomaco smooth the way for new NY State concrete highway
    April 2, 2014
    When New York State Thruway wanted to experiment with unbonded concrete overlays, they chose an 8km, four-lane section of Interstate 90 near Hamburg as their test section. Surianello General Concrete, based in Buffalo, New York, won the bid to pave the 22.9cm thick concrete overlay. The age and the design of the original roadway created a major paving challenge. It was built in the 1950s and didn’t conform to current geometry requirements for superhighways. “They built it with a standard crown sectio
    Read More
  • THIS is a Paving Project– The I-15 CORE
    December 20, 2012
    Provo, Utah – The scope of the I-15 Corridor Expansion Project (I-15 CORE) in the state of Utah is nearly unprecedented because of the size of the project and the short completion deadline. Twenty-four miles (38.6 km) of removal and replacement of Interstate 15 between Lehi and Spanish Fork, widening the number of traveling lanes by two, for up to six lanes in each direction in 35 months. The new 364 lane miles (586 km) of concrete roadway will be slipformed 12 or 12.5 inches (305 or 318 mm) thick for a tot
    Read More
  • Advancing asphalt paving technology
    April 5, 2016
    Asphalt paver manufacturers are meeting demands for high performance machines that can deliver a quality mat - Mike Woof reports Major manufacturers are rolling out ranges of new asphalt pavers designed to meet the latest emissions regulations for Europe, as well as developing models to suit customers in developing nations. The firms have designed many of the latest machines to meet tough new emissions legislation, although versions will also be available for less regulated markets also. Ammann has up
    Read More
  • Wirtgen introducing new concrete paver range
    March 3, 2015
    Wirtgen is introducing a new concrete paver range, the SP90 series. These models will replace the existing SP80 series as well as the SP850. Four basic models have been announced at present, the SP92, SP92i, SP94 and SP94i, although with the range of options and features available, the capabilities offered will be extensive. Paving widths for the machines now range from 2-9.5m, increasing the maximum width and allowing these units to handle a wider array of slipforming tasks than the earlier SP80 Series mod
    Read More

Highlighted Content