Wirtgen machines at Beijing’s new airport

Slipform pavers from Wirtgen have played important roles for the Beijing New International Airport project. The four Wirtgen slipform pavers have been used for the construction of the apron area for the new Chinese airport.
June 10, 2019 Read time: 2 mins
Designed for over one flight movement per minute: the traffic areas need to withstand high loads

The airport is scheduled to start operations on September 30th, 2019 and when it is complete, Beijing New International Airport will become be the world's largest airport. The huge new facility will play a key transport role as Beijing is a major air passenger hub for Asia. The new airport is located 67km from China’s capital city, along the border to Hebei province. It will relieve pressure on the existing airport northeast of Beijing, currently the world’s second-largest in terms of passenger volume. The new airport is expected to handle 45 million passengers at first but will have a total capacity of 100 million.

W_photo_SP500_01227_PR.jpg
A fleet of Wirtgen slipform pavers has been used at Beijing New International Airport in Daxing to construct the apron area, with a parking capacity of 268 aircraft

Low temperatures of around 0°C during the cold winters in Beijing were one of the challenges the Beijing Sino-Aero Construction Engineering Co, team faced during the construction period of the large apron area. A total of four 2395 Wirtgen SP 500 slipform pavers were used for paving single-layer concrete slabs 5m wide and 420mm thick over fixed forms. Levelling and steering parameters were communicated to the Wirtgen machine control system using string-line sensors. To withstand the high aircraft loads, the concrete slabs have been reinforced by means of steel dowels. High productivity and machine availability meant that the strict daily production targets were achieved, allowing the tight timeline to be met.

Cost factors are important for large projects and when choosing an equipment fleet, a contractor has to consider several factors. Minimising manpower was one of the main criteria considered by Sino-Aero Construction Engineering. The firm concluded that the Wirtgen slipform pavers would meet the demands of the automated concrete paving work to be carried out.

The paving work was carried out within the necessary parameters, as scheduled. The paving mold slipformed the concrete, exceeding the required specifications. Electrical vibrators were used to provide the high-frequency vibrations needed for optimum compaction of the concrete during the slipforming work. And the oscillating beam and super-smoother then provided the required finish for the new pavement.

Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Wirtgen introduces new concrete slipform pavers
    March 2, 2016
    Wirtgen is expanding its range of slipform pavers with the new SP 60 series and SP 90 series models. The SP 60 models are smaller units designed to be used in a range of applications while the larger SP 90 series suit duties such as highway or runway construction. The SP 60 models include the SP 61i, SP 62i and SP 64i and will replace the earlier SP 500 design. Power comes from a diesel delivering 180kW in Tier 4 Final/Stage IV and 155kW in Tier 3/Stage IIIA emissions ratings. The SP 64i can feature four
    Read More
  • Wirtgen introduces new concrete slipform pavers
    January 6, 2017
    Wirtgen is expanding its range of slipform pavers with the new SP 60 series and SP 90 series models. The SP 60 models are smaller units designed to be used in a range of applications while the larger SP 90 series suit duties such as highway or runway construction. The SP 60 models include the SP 61i, SP 62i and SP 64i and will replace the earlier SP 500 design. Power comes from a diesel delivering 180kW in Tier 4 Final/Stage IV and 155kW in Tier 3/Stage IIIA emissions ratings. The SP 64i can feature four
    Read More
  • Hot work for GOMACO at Doha airport
    November 2, 2012
    The country of Qatar, located on the Persian Gulf, developed a master plan to build a new replacement airport in its capital city of Doha, the New Doha International Airport, in 2003. Its goal is to have a facility capable of handling 50 million passengers; two million tons (1.8million tonnes) of cargo, and 320,000 aircraft landings and take-offs each year by 2015. Phase one of the aggressive project is scheduled for completion early next year. The Tayseeir Contractors Company Joint Venture, including Conso
    Read More
  • Sophisticated paving technology from BPO
    October 24, 2019
    Advanced technology is enabling asphalt road surfaces to be laid with greater efficiency
    Read More

Highlighted Content