Upgrades by Power Pavers ensure old generation slipformer uses new Topcon machine control system

Upgrades to a slipform concrete paver built in 1999 allow it to use current technology. US firm Streb Construction has taken a novel approach to its paving fleet by upgrading a CMI paver built in 1999 to use modern machine control technology. The company bought the CMI SF3302 machine new and this piece of equipment had logged a high number of hours since its purchase. However the company realised that this proven piece of equipment could be made to operate more efficiently and productively, as well as more
July 1, 2013 Read time: 3 mins
This proven 1999 paver has been upgraded to use the latest machine control technology

Upgrades to a slipform concrete paver built in 1999 allow it to use current technology

US firm Streb Construction has taken a novel approach to its paving fleet by upgrading a CMI paver built in 1999 to use modern machine control technology. The company bought the CMI SF3302 machine new and this piece of equipment had logged a high number of hours since its purchase. However the company realised that this proven piece of equipment could be made to operate more efficiently and productively, as well as more accurately, by dispensing with stringless controls and using new machine control systems instead. Steve Streb, vice president of Streb Construction, pointed out that stinglines can be vulnerable to on-site damage by vehicles and personnel and that the latest stringless systems avoid this problem and other potential errors.

Streb Construction approached 3975 Power Pavers, which was previously owned by CMI and spoke with the local 7300 Topcon Positioning Systems dealer, Star Equipment, while Sun Source Hydraulics was approached on upgrading the machine hydraulics.

Power Pavers was able to retrofit this machine because the SF3302 has a similar hydraulic circuit to the current SF1700 model. This allowed the firm to install the SF1700 control system and hydraulic components in parallel to the existing components on the SF3302. With the upgrade made, it was then capable of running the Topcon's GPS Paver System, which uses GPS and Topcon’s patented Lazer Zone designed to provide millimetre accurate control for concrete pavers. This package allows minute adjustments to be made to the thickness of the paving by the machine operator while the machine is running, a major benefit to county engineers who conduct depth checks. The system allows the machine operator to make fine incremental changes using the Topcon GX50 control box. Prior to GPS machine control on pavers, the operator or another worker would need to physically run a measure to the hub and adjust the string to measure the adjustment. The Topcon technology provides grade reference over the entire project and supplies vertical measurement. It is designed to pave transitions and even through horizontal and vertical curves, while the system can be simply switched off when not required.

Concrete utility drill 

Ohio-based 286 Minnich Manufacturing claims that its latest A-1 Utility Drill is highly versatile and transportable for an array of concrete drilling applications. Key cost-saving features make the nit easy to purchase for contractors, while still retaining productivity and performance. Its lightweight design ensures portability on the job site while the unit is also versatile as it can drill both vertically and horizontally. “Having the ability to drill horizontally and vertically with one machine is a huge cost-saving feature for contractors,” said Todd Jurjevic, sales and marketing director for Minnich Manufacturing. “These units are also very easy to adjust, which helps save time on site.” 

The A-1 utility drill is available in two models - the A-1-24 UTL and the A-1-30 UTL. Both models are said to be powerful and compact, allowing them to be used productively for drilling in confined spaces. An array of special application and pattern kits are also available from Minnich depending on the specific job. The A-1-24 UTL has an operating weight of 34kg, and can reach a drill depth of 177mm, with a cut-out width of 609mm. The A-1-30 UTL features an operating weight of 36kg and can reach a drill depth of 254mm with a cut-out width of 762mm. Both units are available with an optional dust collection system.























Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Komatsu’s versatile new wheeled excavator
    August 17, 2015
    Versatility is a key feature of Komatsu’s highly adaptable PW148-10 wheeled excavator. This new short tail machine is suited to use on job sites with limited space, such as in towns and cities or on narrow roads with heavy traffic. Power comes from a Komatsu SAA4D107E-2 engine that is emissions compliant for use in Europe, highly fuel efficient and delivers 90kW, an increase in output over the earlier model. The operating weight of the machine ranges from 13.7-15.6tonnes depending on the specification.
    Read More
  • Volvo machines help construct new Norwegian tunnels
    January 12, 2015
    Close to Larvik in Norway’s Vestfold County and around 80km south of Drammen, two tunnels are currently under construction as part of a state-funded infrastructure development programme. The project, which began earlier this year, comprises 7km of four lane highway – part of the E18 major route – linking the towns of Bommestad and Sky. This includes the new Larvik and Matineå tunnels, which will span 2.8 and 1.3km respectively. Worth €187 million, this project was awarded to Skanska Norway, the second la
    Read More
  • New methods allow concrete testing on the spot
    July 20, 2015
    This month we look at two new methods which are allowing concrete to be tested on the spot, and [over the page] we catch up on the latest news from concrete testing equipment suppliers - Kristina Smith writes Sometimes test results can be very bad news. If the concrete pavement or bridge abutment has already been poured, and if the concrete does not meet the specification, the outcome could be very expensive remedial work.
    Read More
  • Almost gone: Canada’s old Port Mann Bridge deconstructed
    August 14, 2015
    Three years ago a welder’s cut halved Canada’s old Port Mann Bridge. David Arminas reports from the banks of the Fraser River. By the time this issue of World Highways reaches you, one of Canada’s iconic steel arch bridges will be a shadow of its former self. It’s been a three-year demolition job since the first cut across the deck of the old Port Mann Bridge just outside the city of Vancouver on Canada’s Pacific coast. A new 10-lane 2.2km Port Mann Bridge opened in 2012 (see box). It runs parallel to the o
    Read More

Highlighted Content