Surfaces made safe

Spanning Manahawkin Bay, and carrying traffic along Route 72 between Long Beach Island and Manahawkin, New Jersey, USA, the Dorland J. Henderson Memorial Bridge, known as the Manahawkin Bay Bridge, was in need of repair. New Jersey Department of Transportation (NJDOT) specified Transpo T-17 MMA polymer concrete patch and T-18 MMA polymer concrete slurry overlay as approved materials for the 12,000m² bridge rehabilitation project on the steel girder bridge. All the bridge deck spalls were prepared and patche
April 4, 2012 Read time: 3 mins

Spanning Manahawkin Bay, and carrying traffic along Route 72 between Long Beach Island and Manahawkin, New Jersey, USA, the Dorland J. Henderson Memorial Bridge, known as the Manahawkin Bay Bridge, was in need of repair.

2555 New Jersey Department of Transportation (NJDOT) specified 350 Transpo T-17 MMA polymer concrete patch and T-18 MMA polymer concrete slurry overlay as approved materials for the 12,000m² bridge rehabilitation project on the steel girder bridge.

All the bridge deck spalls were prepared and patched before the entire surface received a thin T-18 MMA overlay. After the removal of the deteriorated existing concrete, T-41 MMA primer was applied to seal the concrete surface and increase the bond strength of the T-17 MMA polymer concrete patches to the existing concrete surface.

When the patching was completed the last operation was the installation of a thin 9.5mm T-18 MMA polymer concrete slurry overlay, and a high-wear and skid-resistant aggregate was broadcast onto the overlay surface. When cured the entire surface was coated with T-18 MMA topcoat to help lock the aggregate into the overlay.

1394 Ennis Prismo Traffic Safety Solutions’ new Fibrescreed RC100MTR crack repair product has passed the technical assessment for crack repair systems for highways under the BBA HAPAS scheme (British Board of Agrément Highways, Highway Authorities Product Approval Scheme).

The assessment means that the product is now approved for use on all major asphalt major roads, motorways and bridges in the UK.

While the approval is for recessed crack repair, Ennis Prismo manufactures a range of Fibrescreed products that can be used for practically all types of crack repair, including kerb sealing, infill, saw cut and seal/crack inducer and SAMI (stress absorbing membrane interlayer).

Fibrescreed RC100MTR is said to reduce costs by extending the life of existing highways without the need for resurfacing, and because it is fast and easy to apply, keeps costly traffic disruption to a minimum.

Meanwhile, 2314 Stirling Lloyd has developed a range of high performance road maintenance products to improve safety for the contractor and road user, and “offer superior in situ performance with a longer service life.” The company’s Safetrack Crack Infill, Safetrack Overbanding and Ultrajoint systems (bitumen-free, liquid, cold applied, fast-curing reactive resin systems for sealing and repairing cracks) are also HPAS Road and Bridges approved.

Stirling Lloyd says that the provision of safer and reliable traffic flows has become a matter of major concern for both the highway authorities and the road users.

“The need for reliable, long-term, safety enhancing road repairs with fast, first-time permanent reinstatement is becoming the driving force in highways maintenance,” says the company.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • U.S National Guard’s airport upgrade
    October 12, 2012
    In Kansas, specialist contractor Pavers has carried out important work for the National Guard. The aim of the work was to rehabilitate a WWII era hangar apron for the Kansas National Guard. The project required extensive repair work, including pavement patching, dowel bar retrofitting, partial depth patching and joint sealing. Pavers had to overhaul a 305m x 91.5m apron at Army Aviation Support Facility No 2 that suffered from poor drainage. The project included milling 152mm of old asphalt and concrete and
    Read More
  • When the rain comes
    July 18, 2012
    Statistics show that wet weather and the dark is not the best mix for driving, but road markings offer a safety solution While good road markings are essential any time of the day, it is perhaps at night when roads are wet that they can offer extra guidance. Statistics are said to reveal that an estimated 50% of all accidents happen during the night when it rains but such conditions occur only 10% of the time and when there are usually less vehicles on the road. Indeed, at the 1st Road Marking Symposium hel
    Read More
  • Polymer enhanced bitumen technology improves performance
    July 11, 2012
    As overall traffic volumes increase, the contribution from commercial vehicles with increased axle loads is growing, putting ever more strain on roads and highway maintenance budgets. Highway authorities are looking for products that will be able to cope better and are more cost effective over the life of a road. Technical innovation is the only way to answer this challenge effectively, says BP Bitumen, one of a number of specialist companies involved in bitumen technology.
    Read More
  • International Call for Abstracts – Deadline to Submit March 15, 2018
    December 14, 2017
    Technology and innovations are evolving at a pace never seen before in the history of the road and transport sector. From innovations in materials, such as self-healing concrete and rubberised asphalt, to advances in construction equipment automation, and of course, the dawn of the connected and automated vehicle, we are on the verge of a new era.
    Read More

Highlighted Content