Machine control developments from Leica Geosystems, Topcon, Trimble and Wirtgen in the slipforming sector

Machine control technologies were pioneered in the concrete paving sector with systems having been used for over 10 years. Leica Geosystems was the first of the machine control technology suppliers to offer these systems on concrete slipforming machines and has developed a strong position in this segment. However the company met resistance from some quarters in the construction market and specialist Karl Soar said that some contractors were very reluctant to give up using conventional stringlines. He said,
July 1, 2013 Read time: 4 mins

Machine control technologies were pioneered in the concrete paving sector with systems having been used for over 10 years. Leica Geosystems was the first of the machine control technology suppliers to offer these systems on concrete slipforming machines and has developed a strong position in this segment. However the company met resistance from some quarters in the construction market and specialist Karl Soar said that some contractors were very reluctant to give up using conventional stringlines. He said, “We provide tools so they can stay in the comfort zone.”

The introduction of machine control systems to paving has changed the way operations work, as well as the duties of those on-site and for example, Soar said that the surveyor has now become a data manager as this is effectively a quality management operation. Machine control systems have brought benefits and Soar said, “It’s all about performance contracts these days.”

He added that squeezed time schedules place pressure on either finish or completion times, which is why the machine control technologies are important for achieving the necessary smoothness within project deadlines.

342 Topcon was next to enter the market for machine control technologies in concrete slipforming. It introduced its package a few years ago and its systems are now offered by a number of the paver manufacturers as an alternative. 307 Power Curbers for example says that its machines can be equipped with either 265 Leica Geosystems or Topcon control packages, as the manufacturer is keen to allow the customer to choose the preferred system rather than dictating which can be used.

Most recently 2122 Trimble has entered this sector with its sophisticated PCS900 system, which can now be used on slipform pavers (as well as milling machines), in addition to the asphalt pavers for which it was originally developed. The system now features extra technology that will increase its accuracy such as a gyroscope that measures lateral movement in the three axes as well as rotational movements, and provides accurate slope sensing capabilities. For wide paving applications, two gyroscopes can be fitted to provide accurate slope sensing from either side of the slipformer. Rugged and compact, the gyroscope is a tough and durable industrial unit that is also comparatively inexpensive. Another feature that will help boost productivity and efficiency is its total universal station capability. With the previous system users had to change channels when moving from one total station to another but now all the stations are connected on the same radio channel. This allows the machine to be run continuously, without needing to reset the control unit and allowing considerable productivity gains across a working shift, as well as helping with continuity with regard to finish.

In addition, 2395 Wirtgen has developed its own AutoPilot Field Rover system, which allows fully automatic paving, boosting productivity. The 3D control system comprises a computer integrated into the machine and a control panel. Two GPS receivers mounted on the machine communicate with a GPS reference station on the job site. There is no need for a digital terrain model as surveying and programming can be carried out on-site. The system is said to be simpler to use than conventional stringline-free 3D systems and allows minor changes to be made quickly on-site.

The software calculates the optimum course on the basis of the measured points, creating a virtual stringline and data is saved on a USB stick for use on the machine. The paver then follows the file on the stick, moves to the start point and then follows the files created. The system bases its calculations on the actual job site measurements and does not require construction drawings and is said to be less costly than conventional 3D technology.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Milling efficiently with machine control
    July 11, 2018
    A contractor in the Netherlands has found that using Topcon’s latest machine control technology can deliver higher quality work at higher productivity The firm, Van Gelder, was looking for a solution to survey, mill and resurface a 7km length of the N518 to the island of Marken more quickly, more safely and more accurately. Together with Infra-Techniek, the company opted to use the latest package developed by Topcon for automatic milling. The N518 from Monnickendam is the only connecting road to the form
    Read More
  • Power Curbers performing on machine control
    January 25, 2017
    And Power Curbers based in Salisbury, North Carolina reports steady throughput at its factory. Becky Lane at Power Curbers said, “A lot of domestic customers are ordering machines now.” This improvement has come because the market for work in parking lots and housing sub-divisions in the US has seen a steady gain. Demand for new machines has increased as a result and particularly as many contractors had previously held off on purchasing new equipment. Lane said, “The markets have picked up and prices are hi
    Read More
  • Trimble’s vision of a far more efficient future
    July 5, 2021
    Trimble is offering a future with more efficient, optimised construction operations for faster project delivery
    Read More
  • Dream machines: Machine technology takes productivity to new levels
    September 9, 2016
    The adoption of new technology will boost productivity for machinery users - Colin Sowman writes Since the inception of earthmoving machinery, equipment manufacturers have been striving to make the process faster, quieter, easier and more fuel efficient. Now many manufacturers are looking at ways to improve the efficiency of drive systems to reduce complexity, maintenance and fuel use.
    Read More

Highlighted Content