Machine control developments from Leica Geosystems, Topcon, Trimble and Wirtgen in the slipforming sector

Machine control technologies were pioneered in the concrete paving sector with systems having been used for over 10 years. Leica Geosystems was the first of the machine control technology suppliers to offer these systems on concrete slipforming machines and has developed a strong position in this segment. However the company met resistance from some quarters in the construction market and specialist Karl Soar said that some contractors were very reluctant to give up using conventional stringlines. He said,
July 1, 2013 Read time: 4 mins

Machine control technologies were pioneered in the concrete paving sector with systems having been used for over 10 years. Leica Geosystems was the first of the machine control technology suppliers to offer these systems on concrete slipforming machines and has developed a strong position in this segment. However the company met resistance from some quarters in the construction market and specialist Karl Soar said that some contractors were very reluctant to give up using conventional stringlines. He said, “We provide tools so they can stay in the comfort zone.”

The introduction of machine control systems to paving has changed the way operations work, as well as the duties of those on-site and for example, Soar said that the surveyor has now become a data manager as this is effectively a quality management operation. Machine control systems have brought benefits and Soar said, “It’s all about performance contracts these days.”

He added that squeezed time schedules place pressure on either finish or completion times, which is why the machine control technologies are important for achieving the necessary smoothness within project deadlines.

342 Topcon was next to enter the market for machine control technologies in concrete slipforming. It introduced its package a few years ago and its systems are now offered by a number of the paver manufacturers as an alternative. 307 Power Curbers for example says that its machines can be equipped with either 265 Leica Geosystems or Topcon control packages, as the manufacturer is keen to allow the customer to choose the preferred system rather than dictating which can be used.

Most recently 2122 Trimble has entered this sector with its sophisticated PCS900 system, which can now be used on slipform pavers (as well as milling machines), in addition to the asphalt pavers for which it was originally developed. The system now features extra technology that will increase its accuracy such as a gyroscope that measures lateral movement in the three axes as well as rotational movements, and provides accurate slope sensing capabilities. For wide paving applications, two gyroscopes can be fitted to provide accurate slope sensing from either side of the slipformer. Rugged and compact, the gyroscope is a tough and durable industrial unit that is also comparatively inexpensive. Another feature that will help boost productivity and efficiency is its total universal station capability. With the previous system users had to change channels when moving from one total station to another but now all the stations are connected on the same radio channel. This allows the machine to be run continuously, without needing to reset the control unit and allowing considerable productivity gains across a working shift, as well as helping with continuity with regard to finish.

In addition, 2395 Wirtgen has developed its own AutoPilot Field Rover system, which allows fully automatic paving, boosting productivity. The 3D control system comprises a computer integrated into the machine and a control panel. Two GPS receivers mounted on the machine communicate with a GPS reference station on the job site. There is no need for a digital terrain model as surveying and programming can be carried out on-site. The system is said to be simpler to use than conventional stringline-free 3D systems and allows minor changes to be made quickly on-site.

The software calculates the optimum course on the basis of the measured points, creating a virtual stringline and data is saved on a USB stick for use on the machine. The paver then follows the file on the stick, moves to the start point and then follows the files created. The system bases its calculations on the actual job site measurements and does not require construction drawings and is said to be less costly than conventional 3D technology.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Innovative concrete paving technology is coming to market
    March 12, 2014
    Two of the leaders in the concrete paving sector are broadening their range of technology, with new systems now coming to the international market The concrete paving market is a niche segment of the construction equipment business, with only a few specialist firms competing. North America is the home of concrete slipforming technology and it is no surprise that all but one of the leading firms in the sector are based in the US. The technology is used worldwide however and with asphalt prices at a high, c
    Read More
  • Leica Geosystems develops machine control
    November 29, 2012
    An array of sophisticated machine control and surveying tools are coming to market from Leica Geosystems. One of the key developments is an addition to its iCON range in the form of its iCONtrol package. The firm says that this offers contractors a portfolio of powerful machine control solutions that can communicate with iCONstruct sensors on site and the iCON office software. This customisable and versatile solution suits use in grading and excavating segment and can be used as a control system for constru
    Read More
  • Silver Star marries a Topcon GPS system to a Power Curber 5700-C
    January 19, 2016
    In the US state of Oklahoma, Silver Star Construction has adopted 3D technology for site modelling and stringless machine control The company, based in the town of Moore, recently used a Topcon Millimeter GPS system mounted on one of their Power Curber 5700-Cs to put down nearly 5,500m of curb and gutter in a residential housing addition in south-west Oklahoma City. Once the dirt work and grading was completed, the concrete crew got to work by mounting the Topcon receivers on their 5700-C. The Topcon
    Read More
  • Construction adapting with Machine control Technologies
    June 18, 2015
    Machine control technologies are revolutionising construction – Dan Gilkes writes Electronic control of engines, transmissions and hydraulic systems, primarily to reduce exhaust emissions and boost productivity, is also providing manufacturers with an opportunity to incorporate increasingly complex machine control into their equipment. This in turn has the potential to make the machinery more productive, further cutting fuel consumption as part of a virtuous operational circle.
    Read More

Highlighted Content