Fast roller paver from Terex

Terex says that its latest Bid-Well 6500 Automatic Roller Paver delivers high performance concrete paving for slabs up to 610mm thick. The machine benefits from a heavy-duty frame design and an 8.9tonne operating weight in standard form. The frame can be configured to meet paving widths from 7.3-18.3m wide, suiting applications in a range of duties including airport runways, taxiways and aprons. Capable of width changes in a matter of hours, the roller paver offers an alternative to slipform pavers for thes
October 12, 2012 Read time: 3 mins
Versatility and ease of use is claimed for Terex’s Bid-Well 6500 roller paver

Terex says that its latest Bid-Well 6500 Automatic Roller Paver delivers high performance concrete paving for slabs up to 610mm thick. The machine benefits from a heavy-duty frame design and an 8.9tonne operating weight in standard form. The frame can be configured to meet paving widths from 7.3-18.3m wide, suiting applications in a range of duties including airport runways, taxiways and aprons. Capable of width changes in a matter of hours, the roller paver offers an alternative to slipform pavers for these applications. The Terex Bid-Well pavers are well proven in airport applications having been used on more than 100 projects worldwide and this latest version offers increased performance.

The 6500’s patented Rota- Vibe vibration system operates at up to 83.3Hz and delivers ef cient concrete consolidation of the surface. This is said to seal difficult-to-finish concrete that can result from harsh mix designs, unpredictable delays, low slump specifications and wind exposure.

An additional tool in ensuring concrete consolidation is the patented dual internal vibration system. This is said to deliver vibration directly to the edgeof the concrete slab. Steering, elevation and cross-slope for the Bid-Well 6500 are controlled by the 3956 Terex Roadbuilding exclusive Hydra-Mation grade control system. This simple, weatherproof unit offers 3.75mm precision, allowing contractors to meet strict smoothness specifications. The system delivers the full mechanical range of the sensors and it can be set up quickly.

The 6500 features a 1.2m truss depth, with double-welded and reinforced steel construction to minimise frame deflection. Standard hydraulic power crown adjustment allows quick changes from the operator’s station. The 6500’s crown can be adjusted at any hinge point, and the paver profile can be inverted for use on drainage areas. Powered by a 44.3kW diesel, the paving carriage travels along its carriage rail on heavy-duty carriage rollers with a side thrust roller. Dual 254mm double-flight augers deliver concrete in front of the Rota-Vibe and paving rollers and require less power than single flight augers for operation. Independent rotation of the two, 1.8m long paving rollers allows three different rolling directions – in unison, reversing or rotating toward each other – for versatility in sealing a variety of mixes. By offering more time under the rollers, the paver is said to optimise surface smoothness, even with machine advancements of up to 300mm at a time. The 6500 also offers a standard lift system for the dual drag pans to quickly raise the pans over drain areas and block-outs. The 6500 paver features four-wheel drive for quick transport around the jobsite and is mounted on 203mm diameter legs. The puncture-resistant tyres travel parallel to the form while paving and pivot 90° at the end of the pour, boosting maneouvrability.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Dual layer, hot to hot paving at German airport
    August 18, 2015
    An airport in Germany has seen the use of very innovative asphalt paving techniques, with the use of dual-layer, hot-to-hot working. The method was used to meet a very tight schedule for the runway rebuilding work, while also delivering the high quality required. Two InLine Pave trains from Vögele were used at Rostock-Laage Airport to lay a new surface and binder course. The operation was innovative as the process used both hot-to-hot, echelon paving as well as dual layer, hot-on-hot working. Using this
    Read More
  • Concrete runway paving in the US
    December 15, 2017
    A new Wirtgen SP 94i slipform paver has helped deliver the successful reconstruction of a runway in the US state of Missouri. With more than 30,000 take-offs and landings a year, Jefferson City Memorial Airport (JEF) is one of the most heavily frequented airports in Missouri. Thousands of visitors travel through it every day on their way to the government and congress offices in the state capital on the Missouri River. At the end of April 2016, work commenced on the reconstruction of a runway approximately
    Read More
  • Advances in US paving machines and material feeders
    May 30, 2013
    Paving machines vary considerably in North America compared with those units used elsewhere. On a worldwide basis, pavers with tamper bar screeds are popular having been developed in Europe and also favoured by Japanese and Chinese firms. But in the US the length of highways to be constructed resulted in a focus on high production pavers, which still continues today. North America and Latin America are key markets for these machines, with Australia being one of the few territories to employ both European an
    Read More
  • Cost-saving compact twin layer asphalt paving
    February 28, 2012
    Twin-layer paving offers high quality, long lasting road surfaces to be constructed. Paver manufacturer Dynapac is one of the pioneers of the twin-layer paving technique, which it calls Compactasphalt. According to Dynapac this method offers major benefits to contractors and clients alike as roads surfaced using this technique last longer and are cheaper to maintain. To ensure contractors have maximum utilisation of their machines, Dynapac offers a modular paver system that can be operated using the convent
    Read More

Highlighted Content