Efficient concrete overlays

Concrete overlays have a long history and proven success in the state of Iowa. Mitchell and Worth counties in north central Iowa have led the way. In the past three years, they have put down approximately 241km of 102mm concrete overlay. Concrete Foundations Inc. (CFI), based out of Hiawatha, Iowa, has slipformed almost 80km of the counties' overlays, including 45km this paving season near the town of Osage. CFI has slipformed most of the overlays with its GOMACO two-track GP-2600 paver. This season, the co
February 15, 2012 Read time: 2 mins
Efficient concrete overlays are being achieved with the use of stringless controls

Concrete overlays have a long history and proven success in the state of Iowa. Mitchell and Worth counties in north central Iowa have led the way. In the past three years, they have put down approximately 241km of 102mm concrete overlay.

Concrete Foundations Inc. (CFI), based out of Hiawatha, Iowa, has slipformed almost 80km of the counties' overlays, including 45km this paving season near the town of Osage.

CFI has slipformed most of the overlays with its 218 Gomaco two-track GP-2600 paver. This season, the company added the Leica Geosystems stringless system and a new GOMACO four-track GHP-2800 paver to the inventory. Both were put to work on the project near Osage.

The new unbonded concrete overlay is 6.7m wide, and the material is placed directly on the existing asphalt surface of the roadway. The surface only has to be swept clean before the mix is dumped on it and concrete slump averages around 13-25mm.

The firm has seen increased production with fewer people needed for stringline maintenance and setup. Five site personnel who normally worked with the stringline are now used elsewhere during the paving process. The lack of stringline also allows them to focus more on quality and production rather than stringline maintenance.

The GOMACO GHP-2800 is pulling burlap for a burlap drag finish behind the paver. Finishers work behind the paver with bull floats before a texture/cure machine applies a longitudinal tine and white spray cure.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • GOMACO claims new paver is smartest available yet
    March 14, 2016
    GOMACO claims that its all-new GP3 slipform paver is the most sophisticated on the market, thanks to a series of new features. The machine is designed for paving widths of up to 9.14m and benefits from a dual-telescoping design that boosts its versatility and adaptability. The machine has a smart frame widening system to allow multiple width changes, as well as smart leg positioning and smart steering capabilities due to its full-steer tracks. These features are all controlled by its GOMACO-developed G+ dig
    Read More
  • GOMACO claims new paver is smartest available yet
    January 6, 2017
    GOMACO claims that its all-new GP3 slipform paver is the most sophisticated on the market, thanks to a series of new features. The machine is designed for paving widths of up to 9.14m and benefits from a dual-telescoping design that boosts its versatility and adaptability. The machine has a smart frame widening system to allow multiple width changes, as well as smart leg positioning and smart steering capabilities due to its full-steer tracks. These features are all controlled by its GOMACO-developed G+ dig
    Read More
  • Major upgrade for Chicago O’Hare Airport
    August 14, 2015
    Internationally, airports are being upgraded and expanded to increase capacity and safety – Mike Woof writes. All around the world, airports are being expanded and upgraded, both to cope with massive increases in passenger numbers and also to handle larger aircraft. Runways have to be rebuilt with stronger structures and surfaces to handle greater air traffic volumes as well as increased loads from larger aeroplanes. Building airport runways, however, poses many challenges for construction crews. Paving qua
    Read More
  • GOMACO paves the way with GP4
    March 13, 2017
    GOMACO says that its new GP4, unveiled at CONEXPO-CON/AGG 2017, is able to pave widths of up to 12.2m. The machine features GOMACO’s latest technology including a smart telescoping frame, smart pivot arms and extreme steering capabilities, as well as the latest G+ control package.
    Read More

Highlighted Content