Efficient concrete overlays

Concrete overlays have a long history and proven success in the state of Iowa. Mitchell and Worth counties in north central Iowa have led the way. In the past three years, they have put down approximately 241km of 102mm concrete overlay. Concrete Foundations Inc. (CFI), based out of Hiawatha, Iowa, has slipformed almost 80km of the counties' overlays, including 45km this paving season near the town of Osage. CFI has slipformed most of the overlays with its GOMACO two-track GP-2600 paver. This season, the co
February 15, 2012 Read time: 2 mins
Efficient concrete overlays are being achieved with the use of stringless controls

Concrete overlays have a long history and proven success in the state of Iowa. Mitchell and Worth counties in north central Iowa have led the way. In the past three years, they have put down approximately 241km of 102mm concrete overlay.

Concrete Foundations Inc. (CFI), based out of Hiawatha, Iowa, has slipformed almost 80km of the counties' overlays, including 45km this paving season near the town of Osage.

CFI has slipformed most of the overlays with its 218 Gomaco two-track GP-2600 paver. This season, the company added the Leica Geosystems stringless system and a new GOMACO four-track GHP-2800 paver to the inventory. Both were put to work on the project near Osage.

The new unbonded concrete overlay is 6.7m wide, and the material is placed directly on the existing asphalt surface of the roadway. The surface only has to be swept clean before the mix is dumped on it and concrete slump averages around 13-25mm.

The firm has seen increased production with fewer people needed for stringline maintenance and setup. Five site personnel who normally worked with the stringline are now used elsewhere during the paving process. The lack of stringline also allows them to focus more on quality and production rather than stringline maintenance.

The GOMACO GHP-2800 is pulling burlap for a burlap drag finish behind the paver. Finishers work behind the paver with bull floats before a texture/cure machine applies a longitudinal tine and white spray cure.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Wirtgen introduces new concrete slipform pavers
    March 2, 2016
    Wirtgen is expanding its range of slipform pavers with the new SP 60 series and SP 90 series models. The SP 60 models are smaller units designed to be used in a range of applications while the larger SP 90 series suit duties such as highway or runway construction. The SP 60 models include the SP 61i, SP 62i and SP 64i and will replace the earlier SP 500 design. Power comes from a diesel delivering 180kW in Tier 4 Final/Stage IV and 155kW in Tier 3/Stage IIIA emissions ratings. The SP 64i can feature four
    Read More
  • Wirtgen introduces new concrete slipform pavers
    January 6, 2017
    Wirtgen is expanding its range of slipform pavers with the new SP 60 series and SP 90 series models. The SP 60 models are smaller units designed to be used in a range of applications while the larger SP 90 series suit duties such as highway or runway construction. The SP 60 models include the SP 61i, SP 62i and SP 64i and will replace the earlier SP 500 design. Power comes from a diesel delivering 180kW in Tier 4 Final/Stage IV and 155kW in Tier 3/Stage IIIA emissions ratings. The SP 64i can feature four
    Read More
  • Productive recycling from BOMAG
    May 15, 2017
    According to BOMAG its powerful new RS500 recyclyer/stabiliser is already proving its worth on construction sites in Germany and France. Every construction site has its special requirements and places different demands on people and machines. Since the start of series production, the RS 500 recycler/stabiliser has been able to contribute its versatility on a number of diverse construction sites. On the A 39 Autobahn near Winsen (Luhe) for example, where 8,000m² was processed/day at a working depth of 200mm,
    Read More
  • Productive recycling from BOMAG
    May 15, 2017
    According to BOMAG its powerful new RS500 recyclyer/stabiliser is already proving its worth on construction sites in Germany and France. Every construction site has its special requirements and places different demands on people and machines. Since the start of series production, the RS 500 recycler/stabiliser has been able to contribute its versatility on a number of diverse construction sites. On the A 39 Autobahn near Winsen (Luhe) for example, where 8,000m² was processed/day at a working depth of 200mm,
    Read More

Highlighted Content