Efficient concrete overlays

Concrete overlays have a long history and proven success in the state of Iowa. Mitchell and Worth counties in north central Iowa have led the way. In the past three years, they have put down approximately 241km of 102mm concrete overlay. Concrete Foundations Inc. (CFI), based out of Hiawatha, Iowa, has slipformed almost 80km of the counties' overlays, including 45km this paving season near the town of Osage. CFI has slipformed most of the overlays with its GOMACO two-track GP-2600 paver. This season, the co
February 15, 2012 Read time: 2 mins
Efficient concrete overlays are being achieved with the use of stringless controls

Concrete overlays have a long history and proven success in the state of Iowa. Mitchell and Worth counties in north central Iowa have led the way. In the past three years, they have put down approximately 241km of 102mm concrete overlay.

Concrete Foundations Inc. (CFI), based out of Hiawatha, Iowa, has slipformed almost 80km of the counties' overlays, including 45km this paving season near the town of Osage.

CFI has slipformed most of the overlays with its 218 Gomaco two-track GP-2600 paver. This season, the company added the Leica Geosystems stringless system and a new GOMACO four-track GHP-2800 paver to the inventory. Both were put to work on the project near Osage.

The new unbonded concrete overlay is 6.7m wide, and the material is placed directly on the existing asphalt surface of the roadway. The surface only has to be swept clean before the mix is dumped on it and concrete slump averages around 13-25mm.

The firm has seen increased production with fewer people needed for stringline maintenance and setup. Five site personnel who normally worked with the stringline are now used elsewhere during the paving process. The lack of stringline also allows them to focus more on quality and production rather than stringline maintenance.

The GOMACO GHP-2800 is pulling burlap for a burlap drag finish behind the paver. Finishers work behind the paver with bull floats before a texture/cure machine applies a longitudinal tine and white spray cure.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Help for US agencies’ to use new tool to boost concrete pavement quality
    April 23, 2014
    In a bid to reduce costs, increase pavement quality, and minimise travel delays caused by road construction, the US Federal Highway Administration (FHWA), the American Association of State Highway and Transportation Officials (AASHTO), and the Transportation Research Board (TRB) are to help agencies implement a tool that allows contractors to identify concrete pavement surface irregularities during construction. Real-time pavement smoothness has been selected for guided implementation under the second Stra
    Read More
  • Continuous transfer
    May 22, 2018
    Roadtec is unveiling its new MTV-1100e material transfer vehicle. The firm says that the new model has been designed from the ground up using experience developing MTVs, combined with customer feedback. It will not replace the existing and well-proven 2500 Shuttle Buggy, but will instead broaden the firm’s offering for the material transfer vehicle (MTV) market. The machine is being developed as an evolution of the firm’s MTV-1100e feeder model however and will not feature the remixing capability of the S
    Read More
  • Innovations in asphalt surfacing will deliver improvements
    June 13, 2017
    Roadtec is unveiling its new MTV-1100e material transfer vehicle. The firm says that the new model has been designed from the ground up using experience developing MTVs, combined with customer feedback. It will not replace the existing and well-proven 2500 Shuttle Buggy, but will instead broaden the firm’s offering for the material transfer vehicle (MTV) market. The machine is being developed as an evolution of the firm’s MTV-1100e feeder model however and will not feature the remixing capability of the Shu
    Read More
  • Continuous material transfer from Roadtec
    June 14, 2017
    Roadtec is unveiling its new MTV-1100e material transfer vehicle. The firm says that the new model has been designed from the ground up using experience developing MTVs, combined with customer feedback. It will not replace the existing and well-proven 2500 Shuttle Buggy, but will instead broaden the firm’s offering for the material transfer vehicle (MTV) market. The machine is being developed as an evolution of the firm’s MTV-1100e feeder model however and will not feature the remixing capability of the Shu
    Read More

Highlighted Content