Efficient concrete overlays

Concrete overlays have a long history and proven success in the state of Iowa. Mitchell and Worth counties in north central Iowa have led the way. In the past three years, they have put down approximately 241km of 102mm concrete overlay. Concrete Foundations Inc. (CFI), based out of Hiawatha, Iowa, has slipformed almost 80km of the counties' overlays, including 45km this paving season near the town of Osage. CFI has slipformed most of the overlays with its GOMACO two-track GP-2600 paver. This season, the co
February 15, 2012 Read time: 2 mins
Efficient concrete overlays are being achieved with the use of stringless controls

Concrete overlays have a long history and proven success in the state of Iowa. Mitchell and Worth counties in north central Iowa have led the way. In the past three years, they have put down approximately 241km of 102mm concrete overlay.

Concrete Foundations Inc. (CFI), based out of Hiawatha, Iowa, has slipformed almost 80km of the counties' overlays, including 45km this paving season near the town of Osage.

CFI has slipformed most of the overlays with its 218 Gomaco two-track GP-2600 paver. This season, the company added the Leica Geosystems stringless system and a new GOMACO four-track GHP-2800 paver to the inventory. Both were put to work on the project near Osage.

The new unbonded concrete overlay is 6.7m wide, and the material is placed directly on the existing asphalt surface of the roadway. The surface only has to be swept clean before the mix is dumped on it and concrete slump averages around 13-25mm.

The firm has seen increased production with fewer people needed for stringline maintenance and setup. Five site personnel who normally worked with the stringline are now used elsewhere during the paving process. The lack of stringline also allows them to focus more on quality and production rather than stringline maintenance.

The GOMACO GHP-2800 is pulling burlap for a burlap drag finish behind the paver. Finishers work behind the paver with bull floats before a texture/cure machine applies a longitudinal tine and white spray cure.
Concrete milling, paving & compaction

For more information on companies in this article

Related Content

  • Simex upgrades ART 1000 cold in-situ recycling attachment to ride a wave of road repairs projects around the world
    April 10, 2025

    Simex has launched the next generation of its ART 1000 attachment for in-situ cold recycling of asphalt roads. ART 1000 – GEN II benefits from upgrades to its on-board electronics to provide more information to the operator, the addition of a Wi-Fi transmitter for remote monitoring, and some small design changes to make maintenance easier.

    Read More
  • A new event is preparing the asphalt industry for tomorrow’s world
    September 11, 2018
    An inaugural event for the European bitumen industry urged attendees to look to the future - Kristina Smith reports What will tomorrow’s roads look like? Will lanes be narrower, will the road charge vehicles as they drive on them, will they collect data, will they be self-cleaning and de-polluting? All these questions and more were pondered at a two-day conference in Berlin, entitled ‘Preparing the asphalt industry for the future’. It was the first such event for Eurasphalt & Eurobitume (E&E), and set a
    Read More
  • Wirtgen offers sophisticated concrete paving system
    January 6, 2017
    Versatility and high performance are key features of the new SP84i slipform paver from Wirtgen. The machinie runs on four steerable crawler tracks and features its mould fitted between the crawler tracks. With a power output of 180kW, the machine can use electric and hydraulic vibration to pave roadways and surfaces and concrete can be selectively distributed by the spreading plough or spreading auger. Wirtgen slipform pavers can be used to lay concrete pavements with a double cross fall of up to 3%.
    Read More
  • Wirtgen offers sophisticated concrete paving system
    February 19, 2014
    Versatility and high performance are key features of the new SP84i slipform paver from Wirtgen. The machinie runs on four steerable crawler tracks and features its mould fitted between the crawler tracks. With a power output of 180kW, the machine can use electric and hydraulic vibration to pave roadways and surfaces and concrete can be selectively distributed by the spreading plough or spreading auger. Wirtgen slipform pavers can be used to lay concrete pavements with a double cross fall of up to 3%.
    Read More

Highlighted Content