Skip to main content

US asphalt demand to reach 24.3 million tonnes in 2019

US demand for asphalt is forecast to increase 3.3% annually to 24.3 million tonness in 2019, the vast majority of which is refined petroleum asphalt, according to a new report. Demand will be spurred by a rebound in building construction, especially for asphalt shingles. But in the much larger market of asphalt paving, gains will be supported by the efforts of state and local governments to maintain the nation’s aging road and highway network. Paving accounted for three-quarters of asphalt use in 2014
August 6, 2015 Read time: 2 mins
US demand for asphalt is forecast to increase 3.3% annually to 24.3 million tonness in 2019, the vast majority of which is refined petroleum asphalt, according to a new report.

Demand will be spurred by a rebound in building construction, especially for asphalt shingles. But in the much larger market of asphalt paving, gains will be supported by the efforts of state and local governments to maintain the nation’s aging road and highway network.

Paving accounted for three-quarters of asphalt use in 2014. Legislative bodies are expected to allocate more funds for repair work, supporting the use of asphalt cements and asphalt emulsions.

These and other trends are presented in Asphalt, a new study from market research firm 2821 Freedonia Group, based in the US city of Cleveland, in the state of Ohio.

“Demand for asphalt in paving applications will advance 3.1% annually to nearly 17.8 million tonness,” said Freedonia analyst Matt Zielenski.

Among asphalt paving products, asphalt emulsions will see the fastest growth in demand through 2019, boosted by increasing interest in in-place recycling. Asphalt emulsions can be used to recycle older pavements while minimising asphalt consumption which in turn reduces the time and cost of paving jobs.

Asphalt cement will remain the leading paving material used in the United States due to the prevalence of hot-mix and warm-mix asphalts in paving jobs. These products are favoured because of their moderate cost and solid performance properties, such as durability and good drainage, the report noted.

The 396-page report, called Asphalt, is available for $5,500 from The Freedonia Group.

For more information on companies in this article

Related Content

  • Sripath’s ReLIXER® Rejuvenates High-RAP Mix on Roadways in Virginia, USA
    October 17, 2022
    A binder dosed with ReLIXER®, an Asphalt Recycling Agent manufactured by Sripath Technologies®, was added to a high-RAP mix which was used to pave 5 lane-mile stretch of roadway in Ashburn, Virginia, USA.
  • Asphalt and bitumen congress attracting strong interest
    April 24, 2012
    Strong interest is being shown in the coming Eurasphalt & Eurobitume Congress. Pavement durability and reduced temperature asphalt technologies are key topics of the Eurasphalt & Eurobitume Congress 2012, to be held this June in Istanbul from 13th-15th June 2012. This fifth Eurasphalt & Eurobitume Congress (E&E 2012) already has a strong line-up of speakers and delegates, with the programme being fine-tuned to meet expectations. Over 800 delegates are expected to attend the event, which will provide detaile
  • Roadtec’s RT-500 trailer: integral to cold in-place recycling
    August 4, 2017
    The Roadtec RT-500 is a mobile trailer that can be pulled and fed by a Roadtec RX-900 milling machine for cold in-place recycling. But it also can be set up on site as a central cold-mix plant, according to the company, based in the US state of Tennessee. The machine features closed loop sizing with an on-board vibratory screen and horizontal shaft impact crusher. The process is designed to prevent having to pre-process RAP when the RT-500 is used as a cold-mix plant. The RT-500 also has a weigh bridge on b
  • Roadtec’s RT-500 trailer: integral to cold in-place recycling
    August 4, 2017
    The Roadtec RT-500 is a mobile trailer that can be pulled and fed by a Roadtec RX-900 milling machine for cold in-place recycling. But it also can be set up on site as a central cold-mix plant, according to the company, based in the US state of Tennessee. The machine features closed loop sizing with an on-board vibratory screen and horizontal shaft impact crusher. The process is designed to prevent having to pre-process RAP when the RT-500 is used as a cold-mix plant. The RT-500 also has a weigh bridge on b