North African roads

Morocco has a rapidly expanding road network, which is benefiting from expertise offered by French contractor Colas
February 8, 2012 Read time: 2 mins
A major contractor In Turkey is using new 206 Dynapac pavers to resurface the busy Istanbul-Ankara highway. Onur Insaat Taahhut bought 12 new Dynapac compactors and pavers at the end of last year and is using two of its new SD135C pavers on the D-100 highway. In all 12 Dynapac asphalt paving machines and vibratory compactors were added to its fleet of equipment, and has put two of the tracked pavers to work on the Ankara to Istanbul link.

The machines, four SD135C medium-sized tracked pavers, four CC524HF articulated tandem rollers and four CA282D medium-range vibratory soil compactors, were supplied through Dynapac's distributor for Turkey, Teknomak Makina. Two of the units were sent to resurface a 30 km stretch of the D-100 highway between Bolu and Gerede, midway between Istanbul and Ankara. The main route between Istanbul and Ankara is the E-80, and this is closely paralleled by the smaller but busy D-100.

Onur's contract involves resurfacing of both 9.6m wide carriageways on a 30km length of the D-100, the contractor working on one carriageway at a time, closing a stretch of about 1km to cause the least disruption to the traffic. The two SD135C units have a maximum working width of 10m and are being used to place an asphalt course that has a final thickness of 140mm, the compaction being carried out by two existing Dynapac CC524HF compactors from Onur's fleet. The firm is laying and compacting of 15,500tonnes of asphalt/day on this project.
Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Improved asphalt compaction
    August 16, 2023
    Several of the major compaction machine manufacturers are introducing new models for the asphalt segment that utilise the latest technology – Mike Woof reports
    Read More
  • Durable surface solution
    February 22, 2012
    Innovative spray pavers from Vögele have been used in Germany to rehabilitate a section of the A99 autobahn near Munich. In all, four SUPER 1800-2 pavers fitted with SprayJet Module were used to pave a thin, noise-reducing asphalt. overlay on spray seal on the A99 to the west of the Allach Tunnel. For pavement rehabilitation, this stretch of the busy orbital motorway near Munich could only be closed to traffic at night. The traffic volume on the A99 orbital motorway near Munich is 100,000-120,000 vehicles/d
    Read More
  • Wirtgen’s 3800 CR rips it up in San Jose
    May 16, 2017
    In California, in-situ cold recycling with a Wirtgen 3800 CR recycler has proved to be the most economical solution. In the US’s Golden State – California – Wirtgen’s 708kW powerhouse the 3800 CR recycler resurfaced 160km of San José’s main traffic arteries in situ, on-the-spot. The 3800 CR worked with a Vögele VISION 5200-2i tracked paver in a rear-load process. With this method, the 3800 CR travels in reverse, removing the damaged asphalt layers in a down-cut process and transferring the recycled material
    Read More
  • Three Pavers for German Bypass Works
    July 20, 2012
    Contractor Matthäi used machine technology from Vögele to place surface course on the new stretch of the B 442 Federal road near Eimbeckhausen in Lower Saxony, Germany. After two years of construction, the residents of Eimbeckhausen are finally rid of the barrage of traffic that had rushed through their small village near Hanover on the B 442 Federal road for decades. Towards the end, almost 14,000 vehicles had been counted per day, 15 – 19% of which were HGVs. All vehicles are now diverted along the four k
    Read More

Highlighted Content