Effective joint heating

Heat Design Equipment (HDE) has introduced updated versions of two of its successful products, the HDE 750 2TMT asphalt maintenance trailer and the HDE JMH 500-PA asphalt joint heater. The asphalt maintenance trailer heats up and softens an area of asphalt, allowing it to be reworked and repaired.
October 3, 2014 Read time: 1 min

7654 Heat Design Equipment (HDE) has introduced updated versions of two of its successful products, the HDE 750 2TMT asphalt maintenance trailer and the HDE JMH 500-PA asphalt joint heater. The asphalt maintenance trailer heats up and softens an area of asphalt, allowing it to be reworked and repaired. According to HDE, the infrared heaters can soften the top 60mm of asphalt to the original mixing temperatures in between five and 10 minutes. The units can be towed to site behind a truck and can then be used to reheat a deteriorated area of asphalt, with a contractor then adding new material and compacting the area in around 20 minutes. HDE’s longitudinal joint heater attaches to pavers to heat the cold joints before the next lane of asphalt is placed. Infrared heaters reheat the edge of the lane, allowing the contractor to then compact the joint and meet specifications.

Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Roadtec’s RT-500 trailer: integral to cold in-place recycling
    August 4, 2017
    The Roadtec RT-500 is a mobile trailer that can be pulled and fed by a Roadtec RX-900 milling machine for cold in-place recycling. But it also can be set up on site as a central cold-mix plant, according to the company, based in the US state of Tennessee. The machine features closed loop sizing with an on-board vibratory screen and horizontal shaft impact crusher. The process is designed to prevent having to pre-process RAP when the RT-500 is used as a cold-mix plant. The RT-500 also has a weigh bridge on b
    Read More
  • Roadtec’s RT-500 trailer: integral to cold in-place recycling
    August 4, 2017
    The Roadtec RT-500 is a mobile trailer that can be pulled and fed by a Roadtec RX-900 milling machine for cold in-place recycling. But it also can be set up on site as a central cold-mix plant, according to the company, based in the US state of Tennessee. The machine features closed loop sizing with an on-board vibratory screen and horizontal shaft impact crusher. The process is designed to prevent having to pre-process RAP when the RT-500 is used as a cold-mix plant. The RT-500 also has a weigh bridge on b
    Read More
  • Vögele sets paving record in German capital
    September 16, 2015
    Material transfer vehicles and remixing systems are crucial to delivering quality paving. Using material transfer vehicles (MTVs) can play a major role in delivering high quality road surfaces. These units can help boost quality by minimising the risk of material or thermal segregation. A major road paving project has been carried out in Germany using innovative paving methods. For the first time ever, binder and surface courses were paved over a width of 15.5m. This paving job was carried out on a 4.2km st
    Read More
  • Warm asphalt is a hot topic
    June 12, 2012
    Lower temperature mixes – a key advance in bitumen technology - Kristina Smith reports Warm and cold mix asphalts were not on the original agenda for this year’s Eurasphalt & Eurobitume Congress, being held in Istanbul in June. But when the organisers took a look through the papers submitted for their sustainability-themed event, they realised that this is one of the industry’s hottest topics. “We hadn’t quite anticipated the high level of research in this area,” says E&E’s technical programme committee c
    Read More

Highlighted Content