Bituchem's FortSeal makes 'speedy repairs'

UK company Bituchem hopes to capitalise on the growing need for road repairs with its proven FortSeal product. Developed in the US, it is said to offer an inexpensive method for repairing and sealing road surfaces. The fast-setting emulsion system can be used to cover small cracks and surface voids, as well as reducing surface brittleness and tackling ravelling.
February 15, 2012 Read time: 2 mins
UK company Bituchem hopes to capitalise on the growing need for road repairs with its proven FortSeal product. Developed in the US, it is said to offer an inexpensive method for repairing and sealing road surfaces. The fast-setting emulsion system can be used to cover small cracks and surface voids, as well as reducing surface brittleness and tackling ravelling.

As an emulsion product, FortSeal can be spread with conventional surface dressings by tack coat equipment. It can be used to seal an asphalt surface from water penetration and is said to easily flow into cracks and surface voids due to its low viscosity, and according to Bituchem using FortSeal can quadruple the life of a road surface.

Roger Lord, 1327 Bituchem Group's managing director, said: "The idea is that it maintains the road at its present condition and will last 3-5 years and then can be applied again.

"With the current constraints on spending, it gives us a chance to look at new maintenance processes," said Lord.

FortSeal can be sprayed on a road, which will then be ready for use in 30 minutes or so. If a section of road needing a repair is closed at night when traffic volumes are low, it can easily be ready for use by morning to carry peak traffic loads.
Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Improved technology for Vögele SprayJet
    February 8, 2016
    Vögele continues to develop its SprayJet technology with the introduction of the new SUPER 1800-3i SprayJet. A key feature is that operation of the spray module has been integrated into the sophisticated ErgoPlus 3 operating system. The module has also been designed as a completely self-contained functional unit. It features a modular design that makes the system simpler to service and allows it to be used both as a spray paver and as a conventional asphalt paver. The paver has a maximum spray width of 6m.
    Read More
  • Improved technology for Vögele SprayJet
    January 6, 2017
    Vögele continues to develop its SprayJet technology with the introduction of the new SUPER 1800-3i SprayJet. A key feature is that operation of the spray module has been integrated into the sophisticated ErgoPlus 3 operating system. The module has also been designed as a completely self-contained functional unit. It features a modular design that makes the system simpler to service and allows it to be used both as a spray paver and as a conventional asphalt paver. The paver has a maximum spray width of 6m.
    Read More
  • Beijing airport runway features novel asphalt solution
    December 7, 2017
    Beijing ranks amongst the five busiest airports across the globe and its runway surfaces face tough stresses as a result. Over 94 million passengers flew through Beijing Capital Airport (BCA) in 2016 and as many as 70 flights/hour can take off and land during peak times. The 60m-wide middle runway of Beijing Capital International Airport is the busiest of the three runways, with a landing and take-off flight ratio of up to 40%. This runway was first rehabilitated in 1996 and then repaired in 2013 and 2015
    Read More
  • Innovative testing boosts pavement quality
    February 16, 2012
    Innovative materials testing technology will allow the road sector to boost pavement quality, Mike Woof and Patrick Smith report. With billions being spent on highway construction worldwide, governments are looking to make sure their investments last as long as possible.
    Read More

Highlighted Content