Precision pothole patching from Bergkamp’s Pivot Tack System

Tack that is sprayed into potholes to increase adhesion within a patch can also adhere to your equipment hoses. In addition, the hoses can present jobsite tripping hazards. To address these common issues, Bergkamp has engineered a Pivot Tack/Air Hose System for its FP5 Flameless All-In-One Pothole Patcher. Located at the back-right side of the FP5’s hopper body, the system’s pivoting arm holds the original tack hose off of the ground and parallel to the hopper, locked in place for transporting with a spr
May 9, 2019 Read time: 2 mins
Blameless with the FP5 Flameless: Bergkamp’s Pivot Tack System keeps tack off of equipment and in the pothole thanks to an extending hose arm support

Tack that is sprayed into potholes to increase adhesion within a patch can also adhere to your equipment hoses. In addition, the hoses can present jobsite tripping hazards. To address these common issues, 3850 Bergkamp has engineered a Pivot Tack/Air Hose System for its FP5 Flameless All-In-One Pothole Patcher.

Located at the back-right side of the FP5’s hopper body, the system’s pivoting arm holds the original tack hose off of the ground and parallel to the hopper, locked in place for transporting with a spring-loaded pin. When in use, the pivot arm also locks into position, allowing the operator to keep the hose suspended and off of the ground. This eliminates a trip hazard, as well as the chance of dragging the hose through wet tack.

The pivot arm and hose system has a 180° pivot capability and provides just over 6m of overall extended reach with the tack wand. A retrofit Pivot Tack/Air Hose System can be mounted on existing FP5 Pothole Patchers.

The updated Pivot Tack/Air Hose System is one of the many ways in which Bergkamp says that its FP5 All-In-One Pothole Patcher not only carries all of the necessary equipment needed for a full day of pothole repair work, but allows a crew to work safely and efficiently.

Bergkamp is a global company based in Salinas, in the US state of Kansas. The company has been manufacturing truck-mounted, trailer-mounted and continuous slurry seal and micro surfacing pavers and equipment, as well as spray injection and pothole patching equipment since 1977.

Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Versatility from Cat with its tiltrotator
    August 28, 2019
    Caterpillar says that the addition of the new TRS23 Tiltrotator System (TRS), from its Work Tools division delivers a full portfolio of TRS configurations for its wheeled and crawler excavators weighing 23-30tonnes. The TRS23 has an integrated control system that boosts carrier versatility and attachment control. The unit can rotate 360° in either direction and tilt up to 40° left and right. This allows the carrier to reach more work areas from a single position and to manoeuvre around obstacles. The TRS
    Read More
  • Fast pothole patching is possible with Fayat’s new Swift
    January 6, 2017
    The new SWIFT pothole patching machine from the Fayat Group is said to deliver fast road repairs that are long-lasting and durable. This all-in-one machine is equipped with a 2,000-litre capacity emulsion tank, a 4m3 hot-mix hopper, a pneumatic drill, a compactor, a 200litre water tank and a storage area for road signs. The firm says that the tools are easy to hold, and have been carefully positioned at the ideal height in boxes designed for this operation. All of the heavier items, such as the pneumatic dr
    Read More
  • Fast pothole patching is possible with Fayat’s new Swift
    February 11, 2013
    The new SWIFT pothole patching machine from the Fayat Group is said to deliver fast road repairs that are long-lasting and durable. This all-in-one machine is equipped with a 2,000-litre capacity emulsion tank, a 4m3 hot-mix hopper, a pneumatic drill, a compactor, a 200litre water tank and a storage area for road signs. The firm says that the tools are easy to hold, and have been carefully positioned at the ideal height in boxes designed for this operation. All of the heavier items, such as the pneumatic dr
    Read More
  • Germany builds its first major PPI autobahn project
    July 7, 2015
    Rebuilding of one of the oldest motorways in Germany is testing out the possibilities for public-private project road construction reports Adrian Greeman A freshly renovated section of the A8 Autobahn in southern Germany will be watched with some interest this summer as traffic begins driving along its rebuilt carriageway and additional third lanes. That is not because of any special road features, other than a distinctive reddish colour to its concrete surface, but because it is a first fullscale public
    Read More

Highlighted Content