Precision pothole patching from Bergkamp’s Pivot Tack System

Tack that is sprayed into potholes to increase adhesion within a patch can also adhere to your equipment hoses. In addition, the hoses can present jobsite tripping hazards. To address these common issues, Bergkamp has engineered a Pivot Tack/Air Hose System for its FP5 Flameless All-In-One Pothole Patcher. Located at the back-right side of the FP5’s hopper body, the system’s pivoting arm holds the original tack hose off of the ground and parallel to the hopper, locked in place for transporting with a spr
May 9, 2019 Read time: 2 mins
Blameless with the FP5 Flameless: Bergkamp’s Pivot Tack System keeps tack off of equipment and in the pothole thanks to an extending hose arm support

Tack that is sprayed into potholes to increase adhesion within a patch can also adhere to your equipment hoses. In addition, the hoses can present jobsite tripping hazards. To address these common issues, 3850 Bergkamp has engineered a Pivot Tack/Air Hose System for its FP5 Flameless All-In-One Pothole Patcher.

Located at the back-right side of the FP5’s hopper body, the system’s pivoting arm holds the original tack hose off of the ground and parallel to the hopper, locked in place for transporting with a spring-loaded pin. When in use, the pivot arm also locks into position, allowing the operator to keep the hose suspended and off of the ground. This eliminates a trip hazard, as well as the chance of dragging the hose through wet tack.

The pivot arm and hose system has a 180° pivot capability and provides just over 6m of overall extended reach with the tack wand. A retrofit Pivot Tack/Air Hose System can be mounted on existing FP5 Pothole Patchers.

The updated Pivot Tack/Air Hose System is one of the many ways in which Bergkamp says that its FP5 All-In-One Pothole Patcher not only carries all of the necessary equipment needed for a full day of pothole repair work, but allows a crew to work safely and efficiently.

Bergkamp is a global company based in Salinas, in the US state of Kansas. The company has been manufacturing truck-mounted, trailer-mounted and continuous slurry seal and micro surfacing pavers and equipment, as well as spray injection and pothole patching equipment since 1977.

Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • G&Z’s improved S600 slipformer
    February 18, 2020
    G&Z is now offering its successful S600 Paver, first introduced in 2010, with a new Tier 4 Final emissions compliant engine and enhanced width capability. The new S600 Power Unit was completely redesigned in 2019 and features:
    Read More
  • Big production
    March 14, 2012
    High quality standards and high quality equipment have led to one company building a strong market share in a part of the US with high requirements on finish. The Pavement Maintenance Division of American Asphalt and Grading is based in Las Vegas, Nevada, but is highly active right across the states of California, Utah, Nevada and Arizona. This operation is run by Eric Reimschiissel and was established as a division from the parent company in 2001 and has since grown to have two paving/patching crews, two s
    Read More
  • Innovative micro-surfacing solution from Breining
    February 8, 2016
    Breining says that it is developing an innovating solution for slurry micro surfacing applications. Its new machine is said to be a modern solution to road maintenance needs, increasing the capacity of existing equipment. The firm has developed a new loading system for use with its slurry pavers as well as its Novasealers. This is said to allow a continuous flow into the machines carrying out slurry paving work, providing a higher quality finish. The unit also does away with the need for an overload truck
    Read More
  • Innovative micro-surfacing solution from Breining
    February 8, 2016
    Breining says that it is developing an innovating solution for slurry micro surfacing applications. Its new machine is said to be a modern solution to road maintenance needs, increasing the capacity of existing equipment. The firm has developed a new loading system for use with its slurry pavers as well as its Novasealers. This is said to allow a continuous flow into the machines carrying out slurry paving work, providing a higher quality finish. The unit also does away with the need for an overload truck
    Read More

Highlighted Content