Skip to main content

NAPA award to contractor Shelly & Sands

US contractor Shelly & Sands has won a key NAPA award.
By MJ Woof February 19, 2020 Read time: 2 mins
Contractor Shelly & Sands won a NAPA award for its work on I-77 in Ohio – image © Courtesy NAPA/Shelly & Sands

The National Asphalt Pavement Association (NAPA) gave the 2019 Sheldon G Hayes Award to contractor Shelly & Sands of Zanesville, Ohio. This was for excellence in construction of an asphalt pavement, for work for the Ohio Department of Transportation (ODOT) on Interstate 77 in Guernsey County, Ohio.

The Sheldon G Hayes Award has been given annually since 1971 and recognises the highest quality highway pavement works carried out in the US. The company received its award at a ceremony during the association’s 54th Annual Meeting in Maui, Hawaii.

“The asphalt pavement industry is committed to building high-quality projects that deliver superior performance to the traveling public,” said 2019 NAPA chairman John Harper. “All contractor’s projects earning a Sheldon G Hayes Award are measured against industry best practices, rated for smoothness a year after construction, and visually inspected to ensure the project lives up to our promise. I’m honoured to say that, in earning a 2019 Sheldon G Hayes Award, Shelly & Sands has exceeded these rigorous standards.”

Over the 8.4km-long I-77 project, Shelly & Sands milled the old pavement and placed new asphalt pavement mixture. As part of the project, the interchange with State Route 541 required complete rehabilitation and upgrading, including removal of old concrete pavement and replacing it with full-depth asphalt.

A 1.6km test section with a void-reducing asphalt membrane (VRAM), construction of a new bridge deck, and the need to begin paving in the middle of the project due to the scheduling of the bridge work were some of the challenges that Shelly & Sands needed to overcome on the project. Despite this, Shelly & Sands received full incentive payments for joint density and smoothness.

In partnering with ODOT, the project was one of the first pilot tests of a thermal imaging camera to monitor pavement temperature to identify thermal segregation from side to side across the mat. All data was shared with ODOT for research purposes.

This marks the second time in three years that Shelly & Sands has been a finalist or winner of the Sheldon G Hayes Award.

The award is named for Sheldon G Hayes, a founder of NAPA and the association’s first chairman. Hayes spent his entire career striving for better construction techniques and improvements in the quality of asphalt pavements.

Related Content

  • Delcan wins IRF Global Road Achievement Award for Quality Management
    January 31, 2013
    Delcan has been awarded the International Road Federation’s (IRF) 2012 Global Road Achievement Award (GRAA) for quality management services on the Maryland Intercounty Connector project. The award was shared with the project owner, the Maryland State Highway Administration. A multi-disciplinary engineering, planning, management and technology firm, Delcan said the Award’s judges made their decision after looking at the technical quality, risk and cost control, of the Maryland Intercounty Connector (MIC) pr
  • Portland bridge deal for HDR
    October 19, 2023
    Consultant HDR has won a key Portland bridge deal.
  • Growing niche market for roller compacted concrete
    February 20, 2012
    A growing niche market for roller compacted concrete has prompted manufacturers to offer solutions. Mike Woof reports. Increased demand for roller compacted concrete (RCC) machines in certain applications mean that this is now a growing market, with manufacturers having developed new machines for this sector. RCC comprises uncrushed and/or crushed aggregate, hydraulic binders and may also contain concrete additives. It is mixed in a concrete mixing plant on or near the job site and one of its main benefits
  • Airport's high demands on asphalt and concrete techniques
    July 11, 2012
    Airport runway, taxiway and parking areas make high demands on paving requirements, both with concrete and asphalt techniques. Mike Woof reports. High quality surface finishes are required in airport environments for runways, taxiways and aircraft parking areas. Because of the speed at which aircraft take off and land and the massive forces exerted due to the weight of the aircraft, particularly during landing, runway structures need to be incredibly strong. The surfaces also have to be constructed to very