Skip to main content

NAPA award to contractor Shelly & Sands

US contractor Shelly & Sands has won a key NAPA award.
By MJ Woof February 19, 2020 Read time: 2 mins
Contractor Shelly & Sands won a NAPA award for its work on I-77 in Ohio – image © Courtesy NAPA/Shelly & Sands

The National Asphalt Pavement Association (NAPA) gave the 2019 Sheldon G Hayes Award to contractor Shelly & Sands of Zanesville, Ohio. This was for excellence in construction of an asphalt pavement, for work for the Ohio Department of Transportation (ODOT) on Interstate 77 in Guernsey County, Ohio.

The Sheldon G Hayes Award has been given annually since 1971 and recognises the highest quality highway pavement works carried out in the US. The company received its award at a ceremony during the association’s 54th Annual Meeting in Maui, Hawaii.

“The asphalt pavement industry is committed to building high-quality projects that deliver superior performance to the traveling public,” said 2019 NAPA chairman John Harper. “All contractor’s projects earning a Sheldon G Hayes Award are measured against industry best practices, rated for smoothness a year after construction, and visually inspected to ensure the project lives up to our promise. I’m honoured to say that, in earning a 2019 Sheldon G Hayes Award, Shelly & Sands has exceeded these rigorous standards.”

Over the 8.4km-long I-77 project, Shelly & Sands milled the old pavement and placed new asphalt pavement mixture. As part of the project, the interchange with State Route 541 required complete rehabilitation and upgrading, including removal of old concrete pavement and replacing it with full-depth asphalt.

A 1.6km test section with a void-reducing asphalt membrane (VRAM), construction of a new bridge deck, and the need to begin paving in the middle of the project due to the scheduling of the bridge work were some of the challenges that Shelly & Sands needed to overcome on the project. Despite this, Shelly & Sands received full incentive payments for joint density and smoothness.

In partnering with ODOT, the project was one of the first pilot tests of a thermal imaging camera to monitor pavement temperature to identify thermal segregation from side to side across the mat. All data was shared with ODOT for research purposes.

This marks the second time in three years that Shelly & Sands has been a finalist or winner of the Sheldon G Hayes Award.

The award is named for Sheldon G Hayes, a founder of NAPA and the association’s first chairman. Hayes spent his entire career striving for better construction techniques and improvements in the quality of asphalt pavements.

Related Content

  • New concrete testing technologies improve speed, safety and quality
    July 8, 2016
    Developments in data processing and management are revolutionising the way concrete strengths can be measured and used to improve efficiencies - Kristina Smith reports on two new technologies A new system that uses thermal imaging to measure the strength of sprayed concrete tunnel linings is being trialled for the first time in London. The brainchild of Dr Benoit Jones, managing director of Inbye Engineering, the technique could lead to improvements in safety, quality and – in the longer run – productivi
  • THIS is a Paving Project– The I-15 CORE
    December 20, 2012
    Provo, Utah – The scope of the I-15 Corridor Expansion Project (I-15 CORE) in the state of Utah is nearly unprecedented because of the size of the project and the short completion deadline. Twenty-four miles (38.6 km) of removal and replacement of Interstate 15 between Lehi and Spanish Fork, widening the number of traveling lanes by two, for up to six lanes in each direction in 35 months. The new 364 lane miles (586 km) of concrete roadway will be slipformed 12 or 12.5 inches (305 or 318 mm) thick for a tot
  • Award winning bridge for North Carolina
    November 21, 2019
    A new bridge in the US state of North Carolina has won a key award for excellence – Mike Woof writes
  • Bitumen technology: three ways to more sustainable roads
    May 14, 2020
    This issue we look at three case studies showcasing new technologies designed to deliver more sustainable paving solutions.