Skip to main content

NAPA award to contractor Shelly & Sands

US contractor Shelly & Sands has won a key NAPA award.
By MJ Woof February 19, 2020 Read time: 2 mins
Contractor Shelly & Sands won a NAPA award for its work on I-77 in Ohio – image © Courtesy NAPA/Shelly & Sands

The National Asphalt Pavement Association (NAPA) gave the 2019 Sheldon G Hayes Award to contractor Shelly & Sands of Zanesville, Ohio. This was for excellence in construction of an asphalt pavement, for work for the Ohio Department of Transportation (ODOT) on Interstate 77 in Guernsey County, Ohio.

The Sheldon G Hayes Award has been given annually since 1971 and recognises the highest quality highway pavement works carried out in the US. The company received its award at a ceremony during the association’s 54th Annual Meeting in Maui, Hawaii.

“The asphalt pavement industry is committed to building high-quality projects that deliver superior performance to the traveling public,” said 2019 NAPA chairman John Harper. “All contractor’s projects earning a Sheldon G Hayes Award are measured against industry best practices, rated for smoothness a year after construction, and visually inspected to ensure the project lives up to our promise. I’m honoured to say that, in earning a 2019 Sheldon G Hayes Award, Shelly & Sands has exceeded these rigorous standards.”

Over the 8.4km-long I-77 project, Shelly & Sands milled the old pavement and placed new asphalt pavement mixture. As part of the project, the interchange with State Route 541 required complete rehabilitation and upgrading, including removal of old concrete pavement and replacing it with full-depth asphalt.

A 1.6km test section with a void-reducing asphalt membrane (VRAM), construction of a new bridge deck, and the need to begin paving in the middle of the project due to the scheduling of the bridge work were some of the challenges that Shelly & Sands needed to overcome on the project. Despite this, Shelly & Sands received full incentive payments for joint density and smoothness.

In partnering with ODOT, the project was one of the first pilot tests of a thermal imaging camera to monitor pavement temperature to identify thermal segregation from side to side across the mat. All data was shared with ODOT for research purposes.

This marks the second time in three years that Shelly & Sands has been a finalist or winner of the Sheldon G Hayes Award.

The award is named for Sheldon G Hayes, a founder of NAPA and the association’s first chairman. Hayes spent his entire career striving for better construction techniques and improvements in the quality of asphalt pavements.

Related Content

  • MOBA’s PAVE-IR system helps boost asphalt paving quality
    March 27, 2015
    The advanced PAVE-IR system from MOBA is said to help improve mat quality control during asphalt paving operations. This system is mounted on the paver and scans back and forth across the paving mat immediately behind the machine’s screed. Data on the thermal image of the mat is then displayed on a screen for the operator to see, as well as being recorded for documentation purposes and later analysis if required.
  • MOBA’s PAVE-IR system helps boost asphalt paving quality
    January 6, 2017
    The advanced PAVE-IR system from MOBA is said to help improve mat quality control during asphalt paving operations. This system is mounted on the paver and scans back and forth across the paving mat immediately behind the machine’s screed. Data on the thermal image of the mat is then displayed on a screen for the operator to see, as well as being recorded for documentation purposes and later analysis if required.
  • EAPA advocate award 2025 presented
    May 9, 2025
    Siobhan McKelvey has been presented with the EAPA advocate award 2025.
  • Swarco inaugurates new glass bead factory in lower Austria
    July 11, 2022
    Glass microspheres are a versatile product. They are used as reflectors to create nighttime visibility of road markings and traffic signs to improve road safety. But they also have multiple uses in non-traffic applications, whether as blasting media in surface treatment, as filler beads for the compaction of plastics, in additive manufacturing / 3D printing, and water filtering techniques, to name just a few.