Skip to main content

Hanson in UK hydrogen-fuelled asphalt trial

Hanson is part of the consortium Bay Hydrogen Hub – Hydrogen4Hanson which will use nuclear-generated heat and electricity to create hydrogen for asphalt and cement sites.
By David Arminas September 19, 2023 Read time: 2 mins
Hanson is part of the consortium Bay Hydrogen Hub – Hydrogen4Hanson which will use nuclear-generated heat and electricity from Heysham 2 Power Station (pictured) in the English county of Lancashire to create hydrogen for asphalt and cement sites (image courtesy EDF)

Materials supplier Hanson plans to scale up hydrogen-fuelled net-zero asphalt production at its Criggion asphalt plant in Wales under a UK government demonstration project.

Last year, the Department for Business Energy and Industrial Strategy awarded the consortium Bay Hydrogen Hub – Hydrogen4Hanson project, in Lancashire, England, around US$500 million for a feasibility study. The EDF-led consortium, in which Hanson is a member, will use technology which uses nuclear-generated heat and electricity to create hydrogen for asphalt and cement sites.

The consortium, which also includes National Nuclear Laboratory (NNL) and Vulcan Burners, will match the government’s funding. The hub’s pilot project aims to use nuclear-power-derived hydrogen from Heysham 2 Power Station in the English county of Lancashire to replace the mix of fossil fuels currently used in asphalt production at Hanson’s Criggion plant in Wales. The trial could be running by next year.

The hydrogen will be created by diverting small quantities of electricity and steam from the nuclear power generation process at Heysham 2, via the construction of a solid oxide electrolysis cell (SOEC) electrolyser. Modern high-capacity tankers will transport the hydrogen for use as a fuel at Criggion.

“Nuclear power derived hydrogen has the potential to be a complete game-changer for decarbonising asphalt and cement production,” said Simon Willis, chief executive of Hanson UK. “Our involvement in the Bay Hydrogen Hub project underscores our commitment to lead the way by investing in cutting edge technologies to prove they can deliver in real-world situations and help us meet our net-zero goals.

“Hanson has already successfully shown that hydrogen can be used as part of a net-zero fuel mix at our cement works in Ribblesdale, Lancashire. But its use as a fuel at an asphalt site has not yet been physically demonstrated anywhere in the world,” said Willis.

Initially work will focus on developing a final design for the hydrogen production, distribution and end-use technology. Switching fuel to net-zero hydrogen asphalt production at Criggion will follow.

Hanson UK, part of Heidelberg Materials and a supplier of heavy building materials to the construction industry, is split into four business lines – aggregates (crushed rock, sand and gravel), concrete, asphalt and contracting and cement.

For more information on companies in this article

Related Content

  • Hydrogen engines from Hyundai
    March 1, 2023
    Hyundai Doosan Infracore (HDI) is aiming to mass produce internal combustion engines (ICE) the use hydrogen as fuel in 2025. The firm is unveiling its prototype ICE power unit that runs on hydrogen in 2023, with full-scale testing planned for 2024, to be followed by full-scale mass production in 2025.
  • London to trial wireless charging
    April 30, 2012
    Qualcomm has announced the first wireless electric vehicle charging (WEVC) trial for London in collaboration with the UK Government, as well as the Mayor of London's office and Transport for London (TfL). The pre-commercial trial is expected to start in early 2012 and will involve as many as 50 electric vehicles (EVs) using Qualcomm wireless inductive power transfer technology that enables high-efficiency power transfer across a large air gap. The driver simply parks the vehicle in the usual way and the sys
  • Fast, cost-effective road stabilisation
    February 15, 2012
    The Kivikko industrial area in Finland, which is owned by the City of Helsinki, has expanded gradually over the years and it has expanded again with the new stabilised area now about 3.5hectares. The ALLU equipment and system was used to stabilise Kivikko for the first time in 2001, and the latest job started in June 2010 with the stabilisation work completed by mid-December 2010. [The ALLU Stabilisation System is a Finnish invention that provides a fast, cost-effective and environmental-friendly working
  • Asphalt paving developments
    March 13, 2012
    US and European asphalt paving needs are different, but some firms are bridging that gap, reports Mike Woof. With a clear differentiation between the US and European asphalt paving markets, manufacturers from the latter are now developing machines aimed at the former. The US and European markets for paving machines have developed along very different lines. North American pavers are designed for high throughputs and high paving rates, having been designed to meet a need to build roads over long distances wi