Sri Lanka Airport runway upgrade

Sri Lanka’s main international airport now features a new runway surface that will help improve air transport efficiency at the facility The project was carried out successfully, despite a tough time schedule, boosting safety at the airport. This new runway will help increase capacity at the airport, allowing Sri Lanka to develop the tourist sector on which the country depends heavily for its economic growth. The work at the international airport for Sri Lanka’s capital Colombo was carried out with the
December 7, 2017 Read time: 2 mins
Eight Dynapac twin drum rollers worked behind the pavers to bring the mat to the necessary compaction specification

Sri Lanka’s main international airport now features a new runway surface that will help improve air transport efficiency at the facility

The project was carried out successfully, despite a tough time schedule, boosting safety at the airport. This new runway will help increase capacity at the airport, allowing Sri Lanka to develop the tourist sector on which the country depends heavily for its economic growth.

The work at the international airport for Sri Lanka’s capital Colombo was carried out with the help of compaction and paving equipment from 206 Dynapac. The reconstruction of the runway at Colombo Bandaranaike International Airport was completed successfully ahead of schedule and has helped to improve the aviation facilities in Sri Lanka greatly, according to the client.

Because this reconstruction project was prioritised as an important transportation hub for the China Belt & Road Initiative, it was carried out by the Chinese contractor, China National Aero-Technology International Engineering Crop (AVIC-ENG). This contractor specialises in carrying out work outside of China, including construction activities. The firm utilised eight Dynapac twin drum compactors rollers; five of the CC522 models and three of the CC624 units. These asphalt compactors operated behind the four Dynapac pavers; two SD2530CS and two SD2550 models. These machines were able to lay the asphalt and compact it to the tight specification required by the client, ahead of the original time schedule.

Work started on the project at the beginning of 2017 and the job was initially expected to be complete by April 6th 2017. However, the main runway construction was finished before the end of March 2017 due to the efficiency of the contractor’s operations and also the dependability of the equipment and the support provided. Working day and night, the paving crew was able to operate at high speed while delivering a precise finish.

Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • XCMG brings paver and other heavy equipment to US, Europe
    March 17, 2023
    XCMG is using small rollers to build trust – and ultimately to lead to sales of bigger equipment down the road.
    Read More
  • Sri Lanka secures ADB loan of $800m towards latest road revamps
    October 26, 2015
    The Asian Development Bank will loan US$800 million to Sri Lanka toward phase three of the country’s Integrated Road Investment Programme. The programme will improve more than 3,100km of rural roads and nearly 250km of national roads at a total cost $906 million. Work will take place in Sabaragamu provinces, Kaluthara District, Central, North Central and North Western Provinces. Sri Lanka recently announced that $292 million has been secured from the Japan International Cooperation Agency for a new
    Read More
  • Austrian project focuses on paving quality
    April 1, 2014
    Work to improve a section of the busy A12 Inntal highway in Austrian Tyrol, Austria, has been carried out by contractor Strabag. The A12 is one of Austria’s busiest highways and carries heavy traffic volumes, particularly in summer when it is an important holiday route through to Southern Europe. The heavy traffic volumes mean that the road has to withstand high stresses. The Brixlegg branch of Strabag carried out a surface renovation contract on the 5.5km stretch between Kundl and Radfield and focussed on
    Read More
  • Dynapac develops compactor in China for local market
    January 6, 2017
    Dynapac has made a notable launch in China with the introduction of its CP275 rubber tyred compactor. The CP275 compaction roller is a notable introduction for Dynapac, as it is the first unit that has been designed in China for this market. The firm’s president, Peter Lauwers, said, “We have now engineering team in China of 50 people that develops its own machines. It has all the features and benefits of a European machine but is for the Chinese market.” This marks a key move, with the firm’s Chinese opera
    Read More

Highlighted Content