Sri Lanka Airport runway upgrade

Sri Lanka’s main international airport now features a new runway surface that will help improve air transport efficiency at the facility The project was carried out successfully, despite a tough time schedule, boosting safety at the airport. This new runway will help increase capacity at the airport, allowing Sri Lanka to develop the tourist sector on which the country depends heavily for its economic growth. The work at the international airport for Sri Lanka’s capital Colombo was carried out with the
December 7, 2017 Read time: 2 mins
Eight Dynapac twin drum rollers worked behind the pavers to bring the mat to the necessary compaction specification

Sri Lanka’s main international airport now features a new runway surface that will help improve air transport efficiency at the facility

The project was carried out successfully, despite a tough time schedule, boosting safety at the airport. This new runway will help increase capacity at the airport, allowing Sri Lanka to develop the tourist sector on which the country depends heavily for its economic growth.

The work at the international airport for Sri Lanka’s capital Colombo was carried out with the help of compaction and paving equipment from 206 Dynapac. The reconstruction of the runway at Colombo Bandaranaike International Airport was completed successfully ahead of schedule and has helped to improve the aviation facilities in Sri Lanka greatly, according to the client.

Because this reconstruction project was prioritised as an important transportation hub for the China Belt & Road Initiative, it was carried out by the Chinese contractor, China National Aero-Technology International Engineering Crop (AVIC-ENG). This contractor specialises in carrying out work outside of China, including construction activities. The firm utilised eight Dynapac twin drum compactors rollers; five of the CC522 models and three of the CC624 units. These asphalt compactors operated behind the four Dynapac pavers; two SD2530CS and two SD2550 models. These machines were able to lay the asphalt and compact it to the tight specification required by the client, ahead of the original time schedule.

Work started on the project at the beginning of 2017 and the job was initially expected to be complete by April 6th 2017. However, the main runway construction was finished before the end of March 2017 due to the efficiency of the contractor’s operations and also the dependability of the equipment and the support provided. Working day and night, the paving crew was able to operate at high speed while delivering a precise finish.

Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Peru’s Oyón -Ambo Highway presents challenges
    August 30, 2022
    Peru’s Oyón-Ambo highway project represents a landmark in construction for the country, while facing significant technical challenges – Paula Chapple, editor of Carreteras Pan-Americana (CPA), writes
    Read More
  • Strabag on the edge with a Dynapac DF145CS paver from Atlas Copco
    June 10, 2015
    When asphalting the inside of the newly raised edge of a water dam, Austrian road construction company Strabag faced a challenge. The paver had to be operated at an angle of between 34-41 degrees with material fed into the hopper from a ledge just 2.8m wide on the edge of the dam. The Waldeck 2 kidney-shaped hydroelectric station is located on a mountaintop about 500m above sea level on Lake Eder in central Germany. The dam, owned by global energy group E.ON, has a perimeter of about 3km. An important pa
    Read More
  • High demand for German-made construction machinery
    February 14, 2018
    The German construction equipment industry is in the middle of a boom, according to data from the country’s equipment manufacturing body, the VDMA. A new report highlights that turnover and incoming orders saw a double-digit increase in 2017 and Germany manufacturers are starting 2018 with a high degree of optimism. According to the VDMA figures, the German construction equipment industry ended 2017 with turnover of €10.8 billion– an increase of 15% compared to the previous year. It is the fourth
    Read More
  • High quality paving has been achieved at the Silverstone race track
    April 6, 2020
    Contractor Tarmac helped provide a high-quality surface for the UK’s famous Silverstone F1 racetrack, with the help of sophisticated technology from Topcon Positioning and Volz Consulting
    Read More

Highlighted Content