Hamburg-Finkenwerder airport has new runway surface

Hamburg’s Finkenwerder airport is now benefiting from a new runway surface following work carried out by contractor KEMNA BAU. The company recently used machines from Dynapac to resurface 36,000m2 of the runway track in Hamburg-Finkenwerder, a facility used by Airbus. The airport handles around 10-15 take-offs and landings/day when aircraft are either undergoing flight testing or being delivered to customers, as well as for deliveries of components by transport aircraft. The project was tricky as the
August 21, 2013 Read time: 3 mins
The contractor had to pave 36,000m2 within a short time frame using the Dynapac pavers and materials feeders

Hamburg’s Finkenwerder airport is now benefiting from a new runway surface following work carried out by contractor KEMNA BAU.

The company recently used machines from 206 Dynapac to resurface 36,000m2 of the runway track in Hamburg-Finkenwerder, a facility used by Airbus. The airport handles around 10-15 take-offs and landings/day when aircraft are either undergoing flight testing or being delivered to customers, as well as for deliveries of components by transport aircraft.

The project was tricky as the contractor had just four days in which to carry out the resurfacing so as to avoid impinging on air traffic. In this short time slot, the firm had to mill out the old asphalt surface down to the original binder course and then repave this with new asphalt. In addition, the contractor was also responsible for the subsequent application of the markings.

To meet the tight time schedule, the contractor used machines working together. Three Dynapac pavers were brought to the site along with Dynapac material feeders to meet the high surface requirements stipulated by the aircraft manufacturer Airbus. The three SD2550CS pavers were set up with R300 TV rigid screeds that were 12m wide. “In order to progress as quickly as possible, we decided to use two staggered machine units, consisting of a paver and a feeder,“  Henning Peter from KEMNA BAU explained. In case of any problems with the equipment, the third Dynapac paver and materials feeder were near at hand on standby.
The firm used the latest version of the MF2500 CS feeder with its short conveyor, which was launched at the 688 Bauma 2013 exhibition a few months ago. The contractor also used the new MF2500 CL version of the feeder with its long conveyor and

both machines worked reliably, with the standby units not being required in the end. As the two pavers were used alongside each other, they were also able to lay the surface with a hot-to-hot joint, which allowed a better bond and will contribute to a longer working life, as well as improving surface quality.

The contractor was able to use the machines to pave the surface and meet the tight quality requirements of the client. The specification stated that the new asphalt surface would not deviate more than +/-0.2% from the desired slope, while unevenness to be a maximum of 3mm over a 4m long test section.
Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Road surfacing: the case for sustainability
    March 5, 2020
    Erik Denneman* makes the social and business case for sustainable pavements for which much of the technology already exists.
    Read More
  • Developments in compact asphalt compaction
    February 20, 2012
    An array of new models has increased competition in the market for compact asphalt compaction products - Mike Woof reports
    Read More
  • Polymer enhanced bitumen technology improves performance
    July 11, 2012
    As overall traffic volumes increase, the contribution from commercial vehicles with increased axle loads is growing, putting ever more strain on roads and highway maintenance budgets. Highway authorities are looking for products that will be able to cope better and are more cost effective over the life of a road. Technical innovation is the only way to answer this challenge effectively, says BP Bitumen, one of a number of specialist companies involved in bitumen technology.
    Read More
  • Using aspahlt testing equipment improves efficiency
    May 28, 2013
    From density tests on a Mongolian gold mine project to an all-singing, all-dancing asphalt tester, Kristina Smith reports on some of the latest new products in materials testing. Perhaps understandably, nuclear density gauges can present contractors with some order to move them at all. “One of the problems with nuclear soil gauges is the restrictions on movement,” said John Lamond, Manufacturing. “If you are a contractor projects cross-border, it’s a real challenge to move a nuclear density gauge around.”
    Read More

Highlighted Content