Hamburg-Finkenwerder airport has new runway surface

Hamburg’s Finkenwerder airport is now benefiting from a new runway surface following work carried out by contractor KEMNA BAU. The company recently used machines from Dynapac to resurface 36,000m2 of the runway track in Hamburg-Finkenwerder, a facility used by Airbus. The airport handles around 10-15 take-offs and landings/day when aircraft are either undergoing flight testing or being delivered to customers, as well as for deliveries of components by transport aircraft. The project was tricky as the
August 21, 2013 Read time: 3 mins
The contractor had to pave 36,000m2 within a short time frame using the Dynapac pavers and materials feeders

Hamburg’s Finkenwerder airport is now benefiting from a new runway surface following work carried out by contractor KEMNA BAU.

The company recently used machines from 206 Dynapac to resurface 36,000m2 of the runway track in Hamburg-Finkenwerder, a facility used by Airbus. The airport handles around 10-15 take-offs and landings/day when aircraft are either undergoing flight testing or being delivered to customers, as well as for deliveries of components by transport aircraft.

The project was tricky as the contractor had just four days in which to carry out the resurfacing so as to avoid impinging on air traffic. In this short time slot, the firm had to mill out the old asphalt surface down to the original binder course and then repave this with new asphalt. In addition, the contractor was also responsible for the subsequent application of the markings.

To meet the tight time schedule, the contractor used machines working together. Three Dynapac pavers were brought to the site along with Dynapac material feeders to meet the high surface requirements stipulated by the aircraft manufacturer Airbus. The three SD2550CS pavers were set up with R300 TV rigid screeds that were 12m wide. “In order to progress as quickly as possible, we decided to use two staggered machine units, consisting of a paver and a feeder,“  Henning Peter from KEMNA BAU explained. In case of any problems with the equipment, the third Dynapac paver and materials feeder were near at hand on standby.
The firm used the latest version of the MF2500 CS feeder with its short conveyor, which was launched at the 688 Bauma 2013 exhibition a few months ago. The contractor also used the new MF2500 CL version of the feeder with its long conveyor and

both machines worked reliably, with the standby units not being required in the end. As the two pavers were used alongside each other, they were also able to lay the surface with a hot-to-hot joint, which allowed a better bond and will contribute to a longer working life, as well as improving surface quality.

The contractor was able to use the machines to pave the surface and meet the tight quality requirements of the client. The specification stated that the new asphalt surface would not deviate more than +/-0.2% from the desired slope, while unevenness to be a maximum of 3mm over a 4m long test section.
Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Vögele introduces new spray paver
    January 6, 2017
    Vögele is introducing a new generation SprayJet model, built around its latest Super 1800-3i asphalt paver. Like its predecessor, the new machine features an add-on emulsion tank and spraybars and is designed to both spray emulsion and carry out asphalt paving. Anja Sehr of the firm’s marketing and communications department said, “This does two steps in one.” She added that using this type machine boosts paving quality, as the SprayJet can ensure a homogenous layer of emulsion is spread over the surface, be
    Read More
  • Bertha ends her Alaskan Way voyage in Seattle
    December 21, 2017
    Seattle's State Route 99 viaduct is coming down. David Arminas was on site. Bertha, the world’s largest diameter earth pressure balance tunnel boring machine, with a cutterhead diameter of 17.5m, is no more. Her 2.7km journey underneath the waterfront area of Seattle finished on April 4 and the power went off for the last time on an extraordinary TBM that had finally completed an extraordinary job. “A small sidewalk job would have had more impact on city traffic than we have had,” says Brian Russell a v
    Read More
  • Notable developments have been made in milling machines
    February 21, 2013
    The milling machine market is increasingly competitive - Mike Woof reports. Having been a pioneer of the road milling machine market, it is no surprise that the Wirtgen group holds a dominant position in this sector. The company has arguably the broadest range of machines available with the widest array of options and features, to suit specific applications as well as regional requirements. The company has faced increasing levels of competition however, with firms such as BOMAG, Caterpillar, Dynapac, Roadte
    Read More
  • Indonesia toll road completed on schedule
    May 16, 2016
    The construction of the Cipali Toll Road in Indonesia has been completed on time, despite numerous challenges during its construction. The Cipali Toll Road forms part of a larger network, the Trans-Java Toll Road that connects key freeways in Jakarta and beyond. The Trans-Java Toll Road is of enormous importance to Indonesia as it runs for 653km and reduces the existing route by 40km.
    Read More

Highlighted Content