Compaction in the field

Special applications require stringent quality control and with compaction machines a key part of the paving process, their contribution can be vital. A high quality finish has helped athletes breaking sporting records on the track at the Shanghai Stadium in China during this year's 2008 Summer Olympic Games. Built in 1997 the stadium has been the venue for numerous major sporting events prior to the Olympics, however its track was showing signs of wear and the local authorities decided that a full refurbis
July 31, 2012 Read time: 4 mins
Matteini has also used its Dynapac F141CR paver and CC142 tandem roller on a new parking area job

Special applications require stringent quality control and with compaction machines a key part of the paving process, their contribution can be vital.

A high quality finish has helped athletes breaking sporting records on the track at the Shanghai Stadium in China during this year's 2008 Summer Olympic Games. Built in 1997 the stadium has been the venue for numerous major sporting events prior to the Olympics, however its track was showing signs of wear and the local authorities decided that a full refurbishment was required.

To bring the track up to the necessary standard, a high quality finish was needed so as to conform to the highly-specific requirements of the International Olympic Committee. The main and sub-track rehabilitation totaled over 15,000m, and from start to finish took crews over 10 days to complete. A 178 Caterpillar CB534DXW (extra wide) vibratory asphalt compactor was brought in to smooth, compact and finish the new pavement to the necessary parameters. The machine has a 2m wide drum, with dual amplitude and dual frequency vibratory system and according to the firm, moving from high to low amplitude is achieved through a switch on the operator's station. The machine was able to carry out the work to the required specification, helping to produce a surface that was crucial to the many records achieved by athletes at the games.

Meanwhile 206 Dynapac machines are also being used to good effect in some key projects in Europe. In Italy the asphalt specialist Matteini used its new Dynapac PL2000LS planer and new CP271 pneumatic roller as well as eight other Dynapac machines on a contract to repave the historic SR71 highway.

The State Road SR71 connects Arezzo and Florence in Tuscany, and Matteini works on a section between Arezzo and Bibbiena. This historic road link was last fully repaved 25 years ago and increasing traffic levels as well as the poor grades of asphalt and old-fashioned compaction techniques used have resulted in numerous potholes and severe cracking. Arezzo-based contractor Matteini has been using its new Dynapac PL2000 planer and CP271 pneumatic roller along with an F141CR paver and CC522HF and CG233 tandem asphalt rollers. Repair work has been carried out at night to minimise traffic disruption, with milling carried out on each section during the first night and paving of the wearing course the next. This work has been carried out in sections up to 3km long, which require up to 10,000m² of paving on the 10.5m wide, two lane highway.

Matteini is milling the wearing and binder courses in a single pass to a combined depth of 120mm, with the Dynapac PL2000LS milling to its full 2m operating width. The contractor has then repaved the 80mm binder course with a 0/20mm asphalt mix and compacts this with its Dynapac CP271 pneumatic roller and a CC522HF articulated tandem roller. A bitumen emulsion modified spray has been applied above the binder at 1kg/m² to maximise drainage and also to provide a waterproof buffer layer for the binder course. The 40mm thick, porous wearing course, using a 0/12mm porous mix with 20% voids, has then been laid and has also provided anti-skid properties.

To achieve the specified 99% compaction density, Matteini has been using its Dynapac CG233HF roller to deliver three vibrating passes and a single static pass. The CG233HF offers a high frequency mode with low amplitude for thin asphalt layers with a high stone content, which is said to ensure effective compaction without crushing the stone. The CG233HF is then followed by the Dynapac CC522HF roller, which makes two vibrating and one static pass.

The same paving and compaction machines have also been used by the same contractor pave a parking area close to the SR71 highway. n
Earthmoving & soil compaction Asphalt milling, paving & compaction Materials

For more information on companies in this article

Related Content

  • Compact planer under test
    February 22, 2012
    BOMAG has carried out a successful series of demonstrations of its new BM500/15 compact milling machines in Berlin. The machine was tested at the Representative Offices of Rheinland-Palatinate to the Federal Government and the European Union in Berlin and for the first time the planer carried out practical tests in the grounds of the company's Berlin Branch. A total of around 100 guests watched a highly convincing demonstration. After a reception at the Representative Offices of Rheinland-Palatinate delegat
    Read More
  • Smarter paving for Berlin ring road
    December 13, 2018
    Germany’s capital Berlin is now benefiting from a newly widened ring road, which will help reduce peak time congestion Much of the work has been carried out by local contractor Johann Bunte Bauunternehmung, which has helped to widen the Berlin ring road from six to eight lanes. The firm has made extensive use of sophisticated paving controls also on its Vögele machines, the AutoSet Plus automatic functions. And the firm claims that these tools have made the work easier for the paving team to move between t
    Read More
  • Highway widening project for the US
    April 19, 2018
    A highway widening project in the US state of New Hampshire is being assisted by the use of a gravity-fed asphalt paver. The widening work is being carried out as part of an upgrade for a 32km stretch of I-93, which was started eight years ago. The work is being carried out for the New Hampshire Department of Transportation (NHDOT) on a section of the highway between Exits 1 and 5 from the Massachusetts Stateline to Manchester, NH. According to NHDOT, the project involves widening I-93 from two lanes in
    Read More
  • Polymer enhanced bitumen technology improves performance
    July 11, 2012
    As overall traffic volumes increase, the contribution from commercial vehicles with increased axle loads is growing, putting ever more strain on roads and highway maintenance budgets. Highway authorities are looking for products that will be able to cope better and are more cost effective over the life of a road. Technical innovation is the only way to answer this challenge effectively, says BP Bitumen, one of a number of specialist companies involved in bitumen technology.
    Read More

Highlighted Content