Compaction in the field

Special applications require stringent quality control and with compaction machines a key part of the paving process, their contribution can be vital. A high quality finish has helped athletes breaking sporting records on the track at the Shanghai Stadium in China during this year's 2008 Summer Olympic Games. Built in 1997 the stadium has been the venue for numerous major sporting events prior to the Olympics, however its track was showing signs of wear and the local authorities decided that a full refurbis
July 31, 2012 Read time: 4 mins
Matteini has also used its Dynapac F141CR paver and CC142 tandem roller on a new parking area job

Special applications require stringent quality control and with compaction machines a key part of the paving process, their contribution can be vital.

A high quality finish has helped athletes breaking sporting records on the track at the Shanghai Stadium in China during this year's 2008 Summer Olympic Games. Built in 1997 the stadium has been the venue for numerous major sporting events prior to the Olympics, however its track was showing signs of wear and the local authorities decided that a full refurbishment was required.

To bring the track up to the necessary standard, a high quality finish was needed so as to conform to the highly-specific requirements of the International Olympic Committee. The main and sub-track rehabilitation totaled over 15,000m, and from start to finish took crews over 10 days to complete. A 178 Caterpillar CB534DXW (extra wide) vibratory asphalt compactor was brought in to smooth, compact and finish the new pavement to the necessary parameters. The machine has a 2m wide drum, with dual amplitude and dual frequency vibratory system and according to the firm, moving from high to low amplitude is achieved through a switch on the operator's station. The machine was able to carry out the work to the required specification, helping to produce a surface that was crucial to the many records achieved by athletes at the games.

Meanwhile 206 Dynapac machines are also being used to good effect in some key projects in Europe. In Italy the asphalt specialist Matteini used its new Dynapac PL2000LS planer and new CP271 pneumatic roller as well as eight other Dynapac machines on a contract to repave the historic SR71 highway.

The State Road SR71 connects Arezzo and Florence in Tuscany, and Matteini works on a section between Arezzo and Bibbiena. This historic road link was last fully repaved 25 years ago and increasing traffic levels as well as the poor grades of asphalt and old-fashioned compaction techniques used have resulted in numerous potholes and severe cracking. Arezzo-based contractor Matteini has been using its new Dynapac PL2000 planer and CP271 pneumatic roller along with an F141CR paver and CC522HF and CG233 tandem asphalt rollers. Repair work has been carried out at night to minimise traffic disruption, with milling carried out on each section during the first night and paving of the wearing course the next. This work has been carried out in sections up to 3km long, which require up to 10,000m² of paving on the 10.5m wide, two lane highway.

Matteini is milling the wearing and binder courses in a single pass to a combined depth of 120mm, with the Dynapac PL2000LS milling to its full 2m operating width. The contractor has then repaved the 80mm binder course with a 0/20mm asphalt mix and compacts this with its Dynapac CP271 pneumatic roller and a CC522HF articulated tandem roller. A bitumen emulsion modified spray has been applied above the binder at 1kg/m² to maximise drainage and also to provide a waterproof buffer layer for the binder course. The 40mm thick, porous wearing course, using a 0/12mm porous mix with 20% voids, has then been laid and has also provided anti-skid properties.

To achieve the specified 99% compaction density, Matteini has been using its Dynapac CG233HF roller to deliver three vibrating passes and a single static pass. The CG233HF offers a high frequency mode with low amplitude for thin asphalt layers with a high stone content, which is said to ensure effective compaction without crushing the stone. The CG233HF is then followed by the Dynapac CC522HF roller, which makes two vibrating and one static pass.

The same paving and compaction machines have also been used by the same contractor pave a parking area close to the SR71 highway. n
Earthmoving & soil compaction Asphalt milling, paving & compaction Materials

For more information on companies in this article

Related Content

  • Cold road reclamation in South Africa
    July 18, 2012
    Raubex Construction’s new Cat RM500 rotary mixer is proving its worth on a road reclamation work on a South African highway Part of an extensive motorway network some 185km long, South Africa’s ongoing Gauteng Freeway Improvement Project (GIFP) is creating a modern, world-class toll route system. The new road will provide major impetus to socio-economic growth in the country’s most populous and commercially active region. Being built in stages by the South African National Roads Authority (SANRAL), these r
    Read More
  • New milling technology from leading players
    February 9, 2018
    Two major manufacturers, Caterpillar and Wirtgen, are introducing new milling machines. Both firms say that these new, high-production units will offer increased output compared with earlier generation equipment. From Caterpillar come the new PM820, PM822 and PM825 machines, which are half-lane milling machines able to handle full-depth removal of asphalt and concrete pavements in a single pass. The firm claims that these units are highly productive and highly manoeuvrable. In operation the machines weig
    Read More
  • Concrete paving carried out in Nigeria
    April 12, 2018
    A contractor in Nigeria has used concrete paving equipment from Wirtgen to construct a road surface in the south-west of the country AG-Dangote Construction Company used an SP 500 model to repave the road connecting Itori with Ibese, In Nigeria’s Ogun State. For this project, the contractor, a joint venture between the Brazilian company Andrade Gutierrez Company and Nigeria’s Dangote Group, relied on the Wirtgen slipform paver in inset application.
    Read More
  • Crushing and compacting in one
    September 3, 2024

    Hamm is now offering new vibration crusher drums for its HC Series compactors. The machines feature new tool holders, can handle crushing and compacting in a single step and meet Stage V/Tier 4 Final emissions requirements, with Tier 3 emissions variants due shortly. 

    These compactors have been designed specifically to crush and compact rock and stone, allowing processes onsite to be streamlined by reducing the work and expense needed for material preparation and transport. For customers, this means time, cost and CO₂ emissions can be cut by up to 50%. 

    Read More

Highlighted Content