Skip to main content

New airport for Papua New Guinea

A new airport has been constructed in the southern highlands of Papua New Guinea that will help with communications and logistics for the development of a natural gas project in the area. Built at Komo, the airport is sufficiently large to be able to handle the massive Russian Antonov AH-124-100 transport aircraft. Construction of the airport however proved challenging as the climate in this mountainous area is known for its changeable weather and heavy seasonal rainfall. However the airport was need
August 21, 2013 Read time: 3 mins
Building a facility able to handle large aircraft proved extremely challenging due to the climate, the remote location and the difficult terrain

A new airport has been constructed in the southern highlands of Papua New Guinea that will help with communications and logistics for the development of a natural gas project in the area.

Built at Komo, the airport is sufficiently large to be able to handle the massive Russian Antonov AH-124-100 transport aircraft. Construction of the airport however proved challenging as the climate in this mountainous area is known for its changeable weather and heavy seasonal rainfall.

However the airport was needed so as to allow the shipment of heavy equipment to the remote Hides area, with the Antonov destined to make 70 flights to the facility, carrying components. The natural gas operation is run by a subsidiary of Exxon Mobil. The gas will be sourced from the Hides, Angore and Juha gas fields as well as the associated Kutubu, Agogo, Moran and Gobe regions.  The project involves the installation of over 700km of pipelines and the Hides facility will treat the natural gas and condensate.

The PNG LNG consortium consists of seven different companies including ExxonMobil, Oil Search, state-owned National Petroleum Company of PNG, Santos, JX Nippon, landowner interest manager Mineral Resources Development Company and state-owned Petromin. However because of the remote nature of the site and the fast changing climactic conditions, construction proved challenging for 2673 McConnell Dowell and Consolidated Contractors (MCJV), which built the Komo Airfield under contract for ExxonMobil. The work involved construction of a 3.2km long by 45m wide runway, as well as all airport infrastructure, including a terminal building, runway lighting, communication facilities and fuel storage. More than 9,000,000m3 of earth was moved and 55,000tonnes of asphalt was laid on the runway’s surface.
The MCJV partners used a wide array from Volvo Construction Equipment for the work, with 71 different items of machinery. These 359 Volvo CE units including 21 A40E ADTs, 27 EC460CL excavators, eight G990 B-Series graders, six L180F/L150F wheeled loaders, two Volvo 7820B pavers, two PT240R rubber tyred compactors, 15 Volvo soil compactors with five different units used, two BL61 B-Series backhoe loaders and two A35E articulated haulers modified as bowsers to hold 40,000 litres of water. The contracting team had to contend with mud slides and poor road conditions, although the weather proved a particular challenge with an estimated 50 million litres of rainfall.

About 80% of the machines that arrived on site were brand new and each machine clocked up 6,000 to 7,000 hours on average. Having been scrupulously well maintained all of the machines were still in good operational condition after the completion of the airfield and were ready to be transferred to other job sites. Many of the articulated haulers have since been bought by Exxon Mobil for other areas of the PNG LNG project.

For more information on companies in this article

Related Content

  • Dubai infrastructure development
    March 24, 2017
    New infrastructure is being built in Dubai with the help of machines from Volvo CE The Dubai Water Canal is being built in a busy and congested urban area, with the project including construction of major new road bridge crossings. The work is being carried out by Turkish infrastructure specialist DETECH Contracting. The 3.2km waterway is being built through downtown Dubai and is among the most ambitious projects being carried out in the country. When fully opened in 2017 the project – called The Duba
  • G&Z paving Canada’s longest runway
    October 12, 2012
    A contractor in Canada, Dufferin Construction, is using three items of new equipment bought from Guntert & Zimmerman to pave the country’s longest runway. The project is extensive, featuring a new runway measuring 4.3km long by 60m wide, an apron area measuring 145,000m2 and two taxiways, each 3.8km long by 25m wide. In all, the work requires 1.5 million tonnes of base aggregate, and 200,000m2 of cement-stabilised base. Dufferin Construction Company, a division of Holcim (Canada) already owns two other G&Z
  • Airport's high demands on asphalt and concrete techniques
    July 11, 2012
    Airport runway, taxiway and parking areas make high demands on paving requirements, both with concrete and asphalt techniques. Mike Woof reports. High quality surface finishes are required in airport environments for runways, taxiways and aircraft parking areas. Because of the speed at which aircraft take off and land and the massive forces exerted due to the weight of the aircraft, particularly during landing, runway structures need to be incredibly strong. The surfaces also have to be constructed to very
  • Revamped concrete runways now in use at Sydney Airport
    November 15, 2013
    Sydney now has a renovated airport runway thanks to contractors Antoun Civil Engineering and Volumetric Concrete Australia. The airport is a major facility as it is the international hub for airlines like Jetstar Airways and Qantas and handles around 37 million travellers each year, with almost 300,000 aircraft movements. Wear was an issue and the decision was made by the Sydney Airport Corporation Limited (SACL) to replace the concrete slabs that make up the runway system. Originally constructed in the 195