New airport for Papua New Guinea

A new airport has been constructed in the southern highlands of Papua New Guinea that will help with communications and logistics for the development of a natural gas project in the area. Built at Komo, the airport is sufficiently large to be able to handle the massive Russian Antonov AH-124-100 transport aircraft. Construction of the airport however proved challenging as the climate in this mountainous area is known for its changeable weather and heavy seasonal rainfall. However the airport was need
August 21, 2013 Read time: 3 mins
Building a facility able to handle large aircraft proved extremely challenging due to the climate, the remote location and the difficult terrain

A new airport has been constructed in the southern highlands of Papua New Guinea that will help with communications and logistics for the development of a natural gas project in the area.

Built at Komo, the airport is sufficiently large to be able to handle the massive Russian Antonov AH-124-100 transport aircraft. Construction of the airport however proved challenging as the climate in this mountainous area is known for its changeable weather and heavy seasonal rainfall.

However the airport was needed so as to allow the shipment of heavy equipment to the remote Hides area, with the Antonov destined to make 70 flights to the facility, carrying components. The natural gas operation is run by a subsidiary of Exxon Mobil. The gas will be sourced from the Hides, Angore and Juha gas fields as well as the associated Kutubu, Agogo, Moran and Gobe regions.  The project involves the installation of over 700km of pipelines and the Hides facility will treat the natural gas and condensate.

The PNG LNG consortium consists of seven different companies including ExxonMobil, Oil Search, state-owned National Petroleum Company of PNG, Santos, JX Nippon, landowner interest manager Mineral Resources Development Company and state-owned Petromin. However because of the remote nature of the site and the fast changing climactic conditions, construction proved challenging for 2673 McConnell Dowell and Consolidated Contractors (MCJV), which built the Komo Airfield under contract for ExxonMobil. The work involved construction of a 3.2km long by 45m wide runway, as well as all airport infrastructure, including a terminal building, runway lighting, communication facilities and fuel storage. More than 9,000,000m3 of earth was moved and 55,000tonnes of asphalt was laid on the runway’s surface.
The MCJV partners used a wide array from Volvo Construction Equipment for the work, with 71 different items of machinery. These 359 Volvo CE units including 21 A40E ADTs, 27 EC460CL excavators, eight G990 B-Series graders, six L180F/L150F wheeled loaders, two Volvo 7820B pavers, two PT240R rubber tyred compactors, 15 Volvo soil compactors with five different units used, two BL61 B-Series backhoe loaders and two A35E articulated haulers modified as bowsers to hold 40,000 litres of water. The contracting team had to contend with mud slides and poor road conditions, although the weather proved a particular challenge with an estimated 50 million litres of rainfall.

About 80% of the machines that arrived on site were brand new and each machine clocked up 6,000 to 7,000 hours on average. Having been scrupulously well maintained all of the machines were still in good operational condition after the completion of the airfield and were ready to be transferred to other job sites. Many of the articulated haulers have since been bought by Exxon Mobil for other areas of the PNG LNG project.
Earthmoving & soil compaction Asphalt milling, paving & compaction

For more information on companies in this article

Related Content

  • Volvo CE machines help construct and pave Polish highway
    December 17, 2013
    Polish contractors Salini Poland and PBDiM Kobylarnia are building a 64km section of the A1 highway between Toru (Northwest of Warsaw) and Kowale (just south of Gdansk on the Northern coast). This project will complete a key section of the highway and is being funded by the Polish road authority (GDDKiA). Worth some €107 million this is one of three schemes being undertaken by the consortium to complete the main A1 highway.
    Read More
  • Sandvik’s jaw-dropping Superior tooth jaw plates
    May 31, 2017
    Scottish Highlands-based company GF Job is been one of the first companies to trial Sandvik’s Superior tooth jaw plates. Sandvik said that, among other benefits, it has doubled the lifetime of the company’s jaw plates. GF Job, based near Inverness, offers earthmoving, civil engineering, heavy haulage and recycling to contract crushing. It owns five aggregates quarries as well as a wide range of Sandvik mobile crushing and screening equipment, including four tracked jaw crushers. Predominantly, the quarries'
    Read More
  • Sandvik’s jaw-dropping Superior tooth jaw plates
    May 31, 2017
    Scottish Highlands-based company GF Job has been one of the first companies to trial Sandvik’s Superior tooth jaw plates. Sandvik said that, among other benefits, it has doubled the lifetime of the company’s jaw plates. GF Job, based near Inverness, offers earthmoving, civil engineering, heavy haulage and recycling to contract crushing. It owns five aggregates quarries as well as a wide range of Sandvik mobile crushing and screening equipment, including four tracked jaw crushers. Predominantly, the quarries
    Read More
  • The payload answer for ADT haulage?
    July 8, 2016
    Will increased ADT load capacity provide a suitable solution to increasing aggregate and earthmoving haulage needs? Mike Woof reports The rule of thumb with off-highway machinery is that for bulk operations, larger equipment can deliver economies of scale, with bigger payloads allowing a better cost/tonne. Heavier machines may be less versatile than more compact units, so a type of equipment that retains its versatility as it is scaled up in size can offer major benefits. For the articulated dumptruc
    Read More

Highlighted Content