Skip to main content

XCMG provides rescue capabilities to Chinese earthquake area

Within 24 hours after the 6.5 magnitude earthquake, XCMG was hard at work on site XCMG recently provided a fast emergency response to an earthquake-stricken area of China. The firm’s rescue team rushed to provide help following the 6.5-magnitude earthquake which hit Ludian County in Yunnan Province. Rescuers reported 398 deaths, 1,801 injured, and in excess of 10,000 buildings having collapsed.
January 5, 2015 Read time: 2 mins
XCMG machines were used to help clear roads
Within 24 hours after the 6.5 magnitude earthquake, XCMG was hard at work on site

2490 XCMG recently provided a fast emergency response to an earthquake-stricken area of China. The firm’s rescue team rushed to provide help following the 6.5-magnitude earthquake which hit Ludian County in Yunnan Province.

Rescuers reported 398 deaths, 1,801 injured, and in excess of 10,000 buildings having collapsed. The Chinese authorities started a Level-1 emergency response, with XCMG responding quickly by setting up its own rescue team, which mobilised heavy equipment, including truck cranes, wheeled loaders, and excavators to provide assistance.

Within 24 hours of the earthquake having struck, XCMG had delivered seven wheeled loaders, four excavators, and two cranes to carry out urgent repairs to the main highway and on-site earthquake relief work. The use of the equipment was directed by the Zhaotong Traffic Bureau and Highway Bureau.

Six of the machines were used to repair the highway from Zhaotong Highway Bureau to Ludian. Four XCMG loaders repaired the landslide section in the highway towards the disaster-stricken area, with the work carried out overnight. And XCMG excavators repaired the landslide-damaged road in Longtoushan Township.

In such a disaster, the time taken to respond is crucial as delays can cost lives. When the news of the earthquake became known, XCMG chairman Wang Min responded by mobilising the firm’s nearest rescue forces quickly to assist in the relief work, set up the earthquake relief headquarters in Zhaotong under vice president Sun Jianzhong, and established the rescue team with locally available equipment.

A large XCMG wheeled loader was used in Longtoushan Township very soon after the earthquake, but the damage to roads and a bridge caused by a landslide meant that pieces of equipment had to be kept on standby 6km away until the links could be repaired sufficiently.

Only disaster relief vehicles were allowed on the road to the disaster-stricken area, with heavy equipment and civilian vehicles not being permitted to enter the area. However, police officers in charge of the traffic realised the importance of bringing the heavy equipment to the site quickly and relieved the congestion as quickly as possible so that the XCMG machines could be delivered to the stricken area.

For more information on companies in this article

Related Content

  • Lumitex lights up EastLink
    October 26, 2021
    The two EastLink tunnels in Melbourne, Australia, have become the first major tunnels in Victoria state to be lit by LED lighting.
  • New bridge is spanning China’s Yangtze River
    June 28, 2013
    There is massive development in design and construction of bridges in China and the Yingwuzhou Bridge over the Yangtze River is one key project – Mike Woof reports, with assistance from Route One’s Chinese publishing partner *CMTM Called the Mother River, the Yangtze is a focal point for China politically, economically and culturally. The river has been at the heart of China’s development for millennia, its history stretching back as far as the dawn of human civilisation. The name Yangtze, or Yangzi, is its
  • Terex Roadbuilding up to bridge paving challenge
    April 23, 2013
    Taking on a major bridge project in Calgary, Alberta province, Canada prompted Mission, British Columbia-based Camwood Construction to reassess its practice of subcontracting deck paving works. Inside the Terex booth at World of Concrete 2012, representatives from Camwood met with Mike Rodriguez, district manager for Terex Roadbuilding, and discussed the Terex Bid-Well 4800 paver on display. “The 4800 was the size of machine we needed for the Calgary job,” said Camwood owner Jeremy Woodman. Tony Regina, Cam
  • XCMG boosting capacity
    January 6, 2017
    Increased manufacturing capacity has been a key focus for XCMG in recent years, with the firm having committed to upgrading its production facilities. XCMG has invested heavily in new manufacturing capacity for its ranges of cranes and wheeled loaders and both the Heavy Machinery and Wheeled Loader divisions now have new factories. The heavy crane facility produces machines in the 90tonne category and above and all production moved to the new plant in 2012 as the old factory was too small. The new facility