Skip to main content

XCMG provides rescue capabilities to Chinese earthquake area

Within 24 hours after the 6.5 magnitude earthquake, XCMG was hard at work on site XCMG recently provided a fast emergency response to an earthquake-stricken area of China. The firm’s rescue team rushed to provide help following the 6.5-magnitude earthquake which hit Ludian County in Yunnan Province. Rescuers reported 398 deaths, 1,801 injured, and in excess of 10,000 buildings having collapsed.
January 5, 2015 Read time: 2 mins
XCMG machines were used to help clear roads
Within 24 hours after the 6.5 magnitude earthquake, XCMG was hard at work on site

2490 XCMG recently provided a fast emergency response to an earthquake-stricken area of China. The firm’s rescue team rushed to provide help following the 6.5-magnitude earthquake which hit Ludian County in Yunnan Province.

Rescuers reported 398 deaths, 1,801 injured, and in excess of 10,000 buildings having collapsed. The Chinese authorities started a Level-1 emergency response, with XCMG responding quickly by setting up its own rescue team, which mobilised heavy equipment, including truck cranes, wheeled loaders, and excavators to provide assistance.

Within 24 hours of the earthquake having struck, XCMG had delivered seven wheeled loaders, four excavators, and two cranes to carry out urgent repairs to the main highway and on-site earthquake relief work. The use of the equipment was directed by the Zhaotong Traffic Bureau and Highway Bureau.

Six of the machines were used to repair the highway from Zhaotong Highway Bureau to Ludian. Four XCMG loaders repaired the landslide section in the highway towards the disaster-stricken area, with the work carried out overnight. And XCMG excavators repaired the landslide-damaged road in Longtoushan Township.

In such a disaster, the time taken to respond is crucial as delays can cost lives. When the news of the earthquake became known, XCMG chairman Wang Min responded by mobilising the firm’s nearest rescue forces quickly to assist in the relief work, set up the earthquake relief headquarters in Zhaotong under vice president Sun Jianzhong, and established the rescue team with locally available equipment.

A large XCMG wheeled loader was used in Longtoushan Township very soon after the earthquake, but the damage to roads and a bridge caused by a landslide meant that pieces of equipment had to be kept on standby 6km away until the links could be repaired sufficiently.

Only disaster relief vehicles were allowed on the road to the disaster-stricken area, with heavy equipment and civilian vehicles not being permitted to enter the area. However, police officers in charge of the traffic realised the importance of bringing the heavy equipment to the site quickly and relieved the congestion as quickly as possible so that the XCMG machines could be delivered to the stricken area.

For more information on companies in this article

Related Content

  • Beijing’s BICES 2015 exhibition shows strong support
    October 1, 2015
    The BICES 2015 construction equipment exhibition in China’s capital Beijing attracted a strong attendance. Visitor numbers were good while the event also had good support from exhibitors, both Chinese and international. The exhibition benefited strongly from its move to Beijing’s new exhibition centre, located close to the international airport and with far better access by public transport than the previous site. Many attendees chose to travel to the showground by metro, giving swift access from the city c
  • Terex Superlift 3800 crane rises to the challenge in Alsace
    May 14, 2015
    Crane service provider Sarens has used a Terex Superlift 3800 lattice boom crawler crane to lift a pedestrian and bicycle steel bridge over the A4 Autoroute near Schiltigheim, in the Aisace region of France. The job was out of the ordinary, according to the Sarens Group, a transport and specialised rigging specialist based in Wolvertem, Belgium. “We didn’t have a special permit for a heavy-load transport with the required weight,” said Sarens project manager Joost Elsen.
  • XCMG is widening its already extensive model range with the addition of new machines
    October 16, 2013
    From XCMG comes an array of new machines for loading and hauling as well as road construction. Designed for the domestic market, the LW800K LNG is a 28.5tonne wheeled loader powered by a 257kW Weichai diesel and using LNG as fuel. Twin 500litre gas tanks sit just behind the cab and the machine is suited to duties in sites where emissions may be an issue. The machine features ZF axles and a ZF transmission. Standard bucket size is 4.5m3 and it can carry an 8tonne load. This is the latest addition to the fi
  • Hyundai Heavy Industries gets down to business in Cittareale
    August 1, 2017
    Hyundai Heavy Industries, in collaboration with the construction machinery manufacturers Italian dealer Hitex, recently supplied two machines for Earthquake clean-up duties in Italy. The machines - a R60CR-9A crawler excavator and a HL757-9A wheeled loader were handed over to the Il Corpo Nazionale dei Vigile del Fuoco for four-months at no cost. It was August 24, 2016, when an early morning violent 6.2 magnitude earthquake shook central Italy and claimed 297 lives. The epicentre was located near Accumoli,