Machine control helps with earthquake reconstruction

In Japan the latest machine control technologies are being used to help with earthquake reconstruction. Three years after the major earthquake that devastated Miyagi Prefecture on Japan’s main island of Honshu, the clean-up and reconstruction work is far from complete. In addition to rebuilding infrastructure and buildings, the Japanese Government has had to build a series of major improvements to flood protection.
December 4, 2014 Read time: 2 mins

In Japan the latest machine control technologies are being used to help with earthquake reconstruction.

Three years after the major earthquake that devastated Miyagi Prefecture on Japan’s main island of Honshu, the clean-up and reconstruction work is far from complete. In addition to rebuilding infrastructure and buildings, the Japanese Government has had to build a series of major improvements to flood protection.
~
To help speed the rebuilding, sophisticated machine control systems were fitted to the earthmoving machines. Contractor Shimizu installed 1228 MOBA’s Xsite PRO 3D excavation system to move and landscape a total of 52,000m3 of earth within the necessary but tight time slot of just five months. A completely new dyke, taller than before, was built over a total length of 500m in order to ensure stronger and more effective protection against flooding. The tsunami that followed the massive earthquake had swamped the area, causing enormous damage. However the dyke had to feature a steep embankment with an incline angle of 50%, which was challenging to the construction team. But using the 3D system made the process easier than with conventional technologies.

First, the 3D model of the planned dyke, which had been previously created in the office, was transferred to the Xsite PRO system. This model provided the task specification for the excavator operator, along with the respective incline angle and depth specifications. Each work step had to be precisely recorded and represented on the display. Using sensors mounted on the boom, arm, bucket and chassis, the system was able to register the position of the bucket at all times. The machine position and orientation were determined by means of GNSS. The display showed the values in the terrain model, so the excavator operators could recognise when the desired incline angle and depth had been attained and where further material needed to be moved. This allowed the dyke to be built precisely according to the model.

According to the contractor, this resulted in time savings of 15%. Meanwhile there was no need to place stakes on the site, further reducing the time and expense of the job, while it was also possible to avoid having to hire two surveyors for the task of surveying.

Earthmoving & soil compaction Connected Construction

For more information on companies in this article

Related Content

  • Machine control used for road revamp for Arkansas highway
    June 23, 2015
    A historic route in the US state of Arkansas has benefited from the use of machine control during its upgrade The south-west - north-east US Route 67 in Arkansas has long been a significant transport route. This old road follows the natural break between the Ozark Mountains and the Ouachita Mountains. In the 1920s, funding became available for road paving, and the route was designated US Route 67.
    Read More
  • Roth & Söhne future bright thanks to New Holland E385C crawler excavator
    February 19, 2014
    Based in Ellwangen, Germany, contractor Roth & Söhne has recently expanded its existing excavator fleet with a New Holland E385C crawler excavator. Designed primarily for heavy digging duties and handling bulk materials, the E385C also provides powerful performance combined with low fuel consumption, which were key factors in Roth & Söhne’s purchasing decision. Prior to delivery by New Holland dealer Böhrer Baumaschinen, the E385C excavator was equipped with a Trimble positioning system by SITECH West. Ba
    Read More
  • Data collection key to software developments
    February 13, 2012
    The collection and handling of data are key technology drivers in the software sector. New methods of data collection and manipulation are driving significant developments in software at present. The latest technology allows designers and engineers to collect, store and manipulate ever larger amounts of data. Growing use of mobile field equipment for both data collection and field management is driving interactive systems. And in an interview this month Autodesk senior vice-president for the construction an
    Read More
  • Using machine control in earthmoving boosts efficiency
    December 19, 2017
    The use of new machine control tools has made a significant boost in earthmoving efficiency. Automated grade control using GNSS signals has transformed how earthmoving contractors get work done. Through the engineering efforts of its innovators and developers, machine control technology has been improved and refined over the years. A development in the ongoing evolution of machine control technology is Topcon Positioning Systems’ introduction of its 3D-MCMAX integrated 3D dozer system. Most notably, the
    Read More

Highlighted Content