Skip to main content

Volvo DD105 compactors for emerging markets

Features on the DD105 and DD105 OSC include Eco Mode to cut fuel consumption by 30 per cent.
By David Arminas January 7, 2021 Read time: 4 mins
Volvo says that the 86.3kW engine in the DD105 and DD105 OSC compactors make the machines particularly fuel efficient

Volvo Construction Equipment’s 10-tonne asphalt compactors is now equipped with a Tier 3/Stage IIIA engine for the emerging markets.

Volvo says that the 86.3kW engine in the DD105 and DD105 OSC asphalt compactors make the machines particularly fuel efficient. An automatically adjusted power output means the machine delivers only enough power for the job at hand.

Other smart features include Eco Mode which cuts fuel consumption by up to 30 per cent without affecting performance. An auto-idle function reduces engine speed when the roller is stopped.

Inside the cab, ergonomically positioned controls and joystick guarantee effortless maneuverability, while the efficient climate system helps keep the operator comfortable. The rear-mounted engine combined with a curved front glass panel and padded floor contributes to low levels of noise and vibrations within the cab.

Safety and ease of operation are enhanced by the expansive front windscreen which maximises the view down to the drum and spray bars. The structural pillar supporting the roof is at the rear of the cab, meaning the three front glass panels provide an entirely unobstructed view.

When working close to obstacles, the fully adjustable operator station can rotate and slide to the side of the cab to allow a view down the edge of the asphalt – increasing safety and rolling precision.

The 10-tonne compactors come fitted with a 1,680mm wide drum whose design halves the power needed to start the vibration system with no compromise on productivity. This reduces the operator’s exposure to machine vibration while ensuring a smoother finished mat.

Volvo oscillation technology – which eliminates vertical vibrations – in the DD105 OSC offers high compaction performance while producing a non-damaging oscillation movement. This transfers less stress to the surrounding surface, enabling compaction in more delicate application areas, such as bridges, over pipes and close to residential areas.

Additionally, when compacting against a cold joint, the risk of damaging the cold surface is reduced and the material can be more effectively compressed to seal and protect the surface. The oscillatory movement of the drum can also improve surface smoothness by re-aligning the material. To account for the increased wear on the drum surface, the Volvo DD105 OSC roller has a hardened abrasion-resistant alloy steel drum shell which increases longevity.

Also helping operators to achieve a high mat quality in less time is the Compact Assist function powered by the Volvo Co-Pilot display. Compact Assist provides access to a set of work-enhancing apps, including pass mapping and temperature mapping for a real-time insight into the work being undertaken. With easy access to clear and detailed data, the operator can eliminate any damaging over-compaction and ensure complete coverage of the working area.

Both the Volvo DD105 and DD105 OSC feature an automatic water spraying system with triple filtration that provides uniform coverage and variable flow, as well as helping prevent material pick-up. The two water pumps alternate during normal operation. In the rare event of a pump malfunctioning, a constant flow of water to the drum surface is automatically retained.

The large 740-liter water tank means longer time between refills and less downtime. The tank’s low positioning affords the machine a low centre of gravity for excellent stability and can be quickly and easily refilled at ground level.

The double drum compactors are designed for simple servicing and maintenance. The swing-up hood provides complete access to the engine and hydraulic components for efficient service inspections. Using a single key, technicians can access exterior service hatches, while fuses and relays are safely stored in the cab. With ground-level access to the engine, radiator, battery, and filters, daily checkpoints are unobstructed.

When it’s time to leave the jobsite and load the machine onto a transportation truck, operators can rely on the Anti-Slip Control to avoid damaging the pavement.

Model

DD105

DD105 OSC

Operating weight (with ROPS)

kg

10,325

9,851

Drum or rolling width

mm

1,680

Rated engine power

kW

85

Vibration frequency

Hz

40 / 55

39

Amplitude

mm

0.86 / 0.45

0.72

Force

kN

112 / 99

Engine

Volvo D3.8E,
Stage IIIA / Tier 3

Overall length

mm

4,650

Overall width

mm

1,838

Overall height

mm

2,999

 

For more information on companies in this article

Related Content

  • Sakai’s productive oscillation compactor
    November 29, 2018
    Sakai is offering an innovative alternative for oscillation compaction in the shape of its latest SW888ND-1 model. This machine differs radically from other compactors on the market featuring oscillation as an option. Its rivals all feature oscillation on one drum, with conventional vibration on the other. However Sakai’s novel design offers both oscillation and vibration on both drums. This allows the user a wide degree of compaction modes, with the options of either oscillation or vibration on both drum
  • Hamm is investing in compaction equipment and manufacturing
    January 7, 2015
    The Wirtgen Group has invested heavily in its Hamm compaction equipment business - Mike Woof writes New compaction models and a brand new factory are strong examples of how the Wirtgen Group has been investing heavily in its Hamm road roller operation. Four new compactors are being launched, two each for the soil compaction and asphalt compaction markets. The company is launching the new H5i and H7i single drum soil compactors as well as the DV+70i and DV+90i twin drum asphalt compactors.
  • Hamm’s innovative twin drum asphalt roller
    April 10, 2024
    The HD+ 120i V-VIO 12 t tandem roller has the latest Hamm cab, offering good all round visibility as well as various interfaces to connect telematics systems.
  • Telematics could be an area for John Deere and Wirtgen resource sharing
    April 20, 2018
    The gods were smiling on the Wirtgen Group for the company’s Road Technology Days 2018 event. This year it was held in summer-like weather at the recently expanded Voegele plant near Mannheim in Germany. Within days the season dramatically changed from dreary chilly late winter to high temperatures, just in time to bathe the amassed demonstration equipment and the 4,000 guests in summer sunshine. But there won’t be any such dramatic changes within the Wirtgen Group, according to Domenic Ruccolo. After 28