Skip to main content

Tsurumi at the centre of €1.7billion tunnel project in Sweden

Tsurumi has provided six pumps to a major inner city underground tunnel initiative to connect two central islands in Stockholm, Sweden. The LH series high head dewatering pumps being used in Söderström tunnel were added to the project to replace another manufacturer’s pumps following delays. The pumps are positioned 28metres underwater in drilled holes just 200mm wide and are said to be a vital part of the ambitious works, connecting the islands of Södermalm and Riddarholmen. The 300metre long submerged sec
June 13, 2012 Read time: 2 mins
Six LH23.0W pumps, like the one pictured, from Japan-based Tsurumi is being used in the Söderström tunnel project in Stockholm, Sweden
2357 Tsurumi Pump has provided six pumps to a major inner city underground tunnel initiative to connect two central islands in Stockholm, Sweden.

The LH series high head dewatering pumps being used in Söderström tunnel were added to the project to replace another manufacturer’s pumps following delays.

The pumps are positioned 28metres underwater in drilled holes just 200mm wide and are said to be a vital part of the ambitious works, connecting the islands of Södermalm and Riddarholmen.

The 300metre long submerged section of the Söderström tunnel is being built using immersed tunnel sections. These are supported on four grouped piles that have been drilled into the bedrock. This means the tunnel is resting on an underwater bridge.

The submerged tunnel consists of three 100metre long prefabricated sections. The sections contain two tubes that will each carry a 12metre wide railway track and a 5metre wide access tunnel for service and rescue.

Deep channels have been excavated on both sides of the Söderström bay. In these channels the contractor is using the ‘cut and cover’ construction method to connect the underwater and under bedrock tunnel sections. At a depth of 20metres these excavated channels, which have retaining walls held in place by 1.5m wide piles, are the deepest ever used in northern Europe.

The six LH23.0W pumps from Japan-based Tsurumi are being used for dewatering during the complicated installation of submerged tunnel sections at the project. The pumps were said to be chosen for their reliability and powerful capabilities, as well as their compact design.

Work began on the Söderström tunnel project in May 2008 and should be completed by the end of 2012. The project is being managed by JV Söderström tunnel HB, a joint venture between contractors Züblin Scandinavia AB and E. Pihl & Søn A.S.

For more information on companies in this article

Related Content

  • Traficon technology to be deployed in Stockholm road tunnels
    March 22, 2012
    Video detection specialist Traficon has been awarded a contract to provide video image processors for traffic monitoring inside the Södra Länken and Norra Länken tunnels in Stockholm, Sweden. The company will provide some 763 of its VIP-T modules, which have been designed for automatic incident detection and traffic data analysis.
  • Piling job at interchange
    February 17, 2012
    Specialist geotechnical contractors, Bachy Soletanche has started work on a new grade separated interchange on the A41 road in West Bromwich, West Midlands, England, for a Balfour Beatty/Birse joint venture.
  • Fehmarn Belt Tunnel opening set for mid-2029
    August 16, 2024
    Around 1,500 tonnes of reinforcement for casting the concrete tunnel elements are produced weekly for the 17.6km Fehmarn Belt Tunnel that will connect the Danish island of Lolland with the German island of Fehmarn.
  • Doka goes underground in Stockholm
    March 17, 2022
    Stockholm is growing faster than any other European city. But when it comes to traffic, the 1960s-era Essingeleden motorway is still the most important north-south connection and is frequently congested