Skip to main content

Tsurumi at the centre of €1.7billion tunnel project in Sweden

Tsurumi has provided six pumps to a major inner city underground tunnel initiative to connect two central islands in Stockholm, Sweden. The LH series high head dewatering pumps being used in Söderström tunnel were added to the project to replace another manufacturer’s pumps following delays. The pumps are positioned 28metres underwater in drilled holes just 200mm wide and are said to be a vital part of the ambitious works, connecting the islands of Södermalm and Riddarholmen. The 300metre long submerged sec
June 13, 2012 Read time: 2 mins
Six LH23.0W pumps, like the one pictured, from Japan-based Tsurumi is being used in the Söderström tunnel project in Stockholm, Sweden
2357 Tsurumi Pump has provided six pumps to a major inner city underground tunnel initiative to connect two central islands in Stockholm, Sweden.

The LH series high head dewatering pumps being used in Söderström tunnel were added to the project to replace another manufacturer’s pumps following delays.

The pumps are positioned 28metres underwater in drilled holes just 200mm wide and are said to be a vital part of the ambitious works, connecting the islands of Södermalm and Riddarholmen.

The 300metre long submerged section of the Söderström tunnel is being built using immersed tunnel sections. These are supported on four grouped piles that have been drilled into the bedrock. This means the tunnel is resting on an underwater bridge.

The submerged tunnel consists of three 100metre long prefabricated sections. The sections contain two tubes that will each carry a 12metre wide railway track and a 5metre wide access tunnel for service and rescue.

Deep channels have been excavated on both sides of the Söderström bay. In these channels the contractor is using the ‘cut and cover’ construction method to connect the underwater and under bedrock tunnel sections. At a depth of 20metres these excavated channels, which have retaining walls held in place by 1.5m wide piles, are the deepest ever used in northern Europe.

The six LH23.0W pumps from Japan-based Tsurumi are being used for dewatering during the complicated installation of submerged tunnel sections at the project. The pumps were said to be chosen for their reliability and powerful capabilities, as well as their compact design.

Work began on the Söderström tunnel project in May 2008 and should be completed by the end of 2012. The project is being managed by JV Söderström tunnel HB, a joint venture between contractors Züblin Scandinavia AB and E. Pihl & Søn A.S.

For more information on companies in this article

Related Content

  • Stockholm’s new bypass
    March 8, 2021
    Tunnels make up 18km of the 21km of the Swedish capital’s E4 Bypass mega-project. It will have taken 15 years from start to opening in 2030, if all goes well
  • Norway’s massive Rogfast Tunnel project
    December 11, 2018
    The world's longest and deepest road tunnel is underway in western Norway - Adrian Greeman reports
  • The Fehmarnbelt Tunnel, another Danish connection
    June 20, 2017
    The Fehmarnbelt Tunnel between Denmark and Germany is both ambitious and innovative, explains Susanne Kalmar Pedersen, project director at design engineering firm Ramboll, adviser to the client Fehmarn A/S. The ambitious Fehmarnbelt Tunnel - one of Europe’s largest ongoing infrastructure projects - is a priority project within the EU’s Trans European Network (TEN-T) programme. It will link the German island of Fehmarn with the Danish island of Lolland. The tunnel is an 18km immersed combined road and rail l
  • Underground routes for highways
    July 20, 2012
    Increasingly, and where possible, roads are being built in tunnels often for environmental reasons, writes Patrick Smith As part of the new M7 motorway development in the southwest of Ireland, the four-lane route crosses the River Shannon near Limerick, before it flows into the Atlantic. Centrepiece of the 10km long Limerick Southern Ring Road is the required tunnelling (675m long), which including the north and south entrance and exit ramps, means it will be 915m long. Completion of the work is planned for