Short tailswing excavator gains access

In Germany a short tailswing excavator from Doosan has carried out a tricky demolition project. The DX235LCR machine was used to demolish an old residential property, located in close proximity to a road. Belgian demolition contractor Klaus Anthes was brought in to carry out the work in Eppstein in Germany, and used the 24tonne excavator for the job. The work was tricky as the house was located on the side of a hill and also next to a narrow road. However traffic could not be disturbed so the machine had to
November 29, 2012 Read time: 2 mins
The reduced radius Doosan excavator was able to demolish a property without disturbing traffic on the narrow road next to it
In Germany a short tailswing excavator from 695 Doosan has carried out a tricky demolition project. The DX235LCR machine was used to demolish an old residential property, located in close proximity to a road. Belgian demolition contractor Klaus Anthes was brought in to carry out the work in Eppstein in Germany, and used the 24tonne excavator for the job.

The work was tricky as the house was located on the side of a hill and also next to a narrow road. However traffic could not be disturbed so the machine had to work within the boundary of the property. Meanwhile the existing natural stone cellar had to be left in place as this was to provide the base for the new property planned for the site, while the garden to the rear also had to be left as this is in a protected natural area.

The contractor rented the excavator along with a sorting grapple from 1130 Bobcat Bensheim. The 24tonne excavator was useful for this project as it features a short radius design with only 185mm of overhang and a swing diameter of just 3.99m, allowing the contractor to work in confined spaces. Reach and stability were also important, to allow the machine to work on the slope.
Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Dynapac develops drum steer compactor
    March 2, 2016
    The new Atlas Copco Dynapac CG2300 has steering on the drums and comes in addition to the firm’s articulated CC machines. The CG2300 is 3.99m long, 2.99m high and has an inner turning radius of only 2.65m, and an off-set as big as 1.2m. It can be operated in confined spaces and the offset allows it to operate close to kerbs or highway barriers. The CG2300 machine has an ECO Mode that reduces fuel consumption by over 15% and that also helps to lowers operating noise. Working noise is further reduced by a hy
    Read More
  • Dynapac develops drum steer compactor
    January 6, 2017
    The new Atlas Copco Dynapac CG2300 has steering on the drums and comes in addition to the firm’s articulated CC machines. The CG2300 is 3.99m long, 2.99m high and has an inner turning radius of only 2.65m, and an off-set as big as 1.2m. It can be operated in confined spaces and the offset allows it to operate close to kerbs or highway barriers. The CG2300 machine has an ECO Mode that reduces fuel consumption by over 15% and that also helps to lowers operating noise. Working noise is further reduced by a hy
    Read More
  • Compact excavation
    February 15, 2012
    According to Bobcat its new 4-6tonne class mini excavators offer high performance in a compact chassis. The E45 and E50 models are zero tailswing machines designed to operate in close confines close to obstructions. Low noise and low emissions are features of these machines, along with precise control and both machines are based on the same chassis. Equipped with cab and bucket, the E45 has an operating weight of 4.6tonnes and offers a maximum digging depth of 3.3m. The E50 model, equipped with cab and buck
    Read More
  • Busy UK motorway junction demolished in tight time frame – Mark Anthony reports
    October 18, 2012
    Military-style planning and overwhelming demolition firepower ensured that Armac Group avoided financial penalties and the wrath of drivers on one of the UK’s busiest motorway intersections. Demolition & Dismantling reports. 6 January is traditionally known for the visit of the three wise men to Bethlehem. However, on 6 January 2012, three wise demolition engineers from Armac Group was tasked with dismantling the monumental structure known as Catthorpe Viaduct: the main overbridge of the M6/M1/A14 interc
    Read More

Highlighted Content