Short tailswing excavator gains access

In Germany a short tailswing excavator from Doosan has carried out a tricky demolition project. The DX235LCR machine was used to demolish an old residential property, located in close proximity to a road. Belgian demolition contractor Klaus Anthes was brought in to carry out the work in Eppstein in Germany, and used the 24tonne excavator for the job. The work was tricky as the house was located on the side of a hill and also next to a narrow road. However traffic could not be disturbed so the machine had to
November 29, 2012 Read time: 2 mins
The reduced radius Doosan excavator was able to demolish a property without disturbing traffic on the narrow road next to it
In Germany a short tailswing excavator from 695 Doosan has carried out a tricky demolition project. The DX235LCR machine was used to demolish an old residential property, located in close proximity to a road. Belgian demolition contractor Klaus Anthes was brought in to carry out the work in Eppstein in Germany, and used the 24tonne excavator for the job.

The work was tricky as the house was located on the side of a hill and also next to a narrow road. However traffic could not be disturbed so the machine had to work within the boundary of the property. Meanwhile the existing natural stone cellar had to be left in place as this was to provide the base for the new property planned for the site, while the garden to the rear also had to be left as this is in a protected natural area.

The contractor rented the excavator along with a sorting grapple from 1130 Bobcat Bensheim. The 24tonne excavator was useful for this project as it features a short radius design with only 185mm of overhang and a swing diameter of just 3.99m, allowing the contractor to work in confined spaces. Reach and stability were also important, to allow the machine to work on the slope.
Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Zaxis-5s up to tough test challenge
    April 11, 2013
    Since the new Hitachi Zaxis-5 range was launched at Intermat in April 2012, the ZX250LC-5, ZX290LC-5 and ZX350LC-5 medium excavators, and ZX670LCH-5 and ZX870LCH-5 large machines have been delivered to a wide range of customers for their first assignments all over Europe by Hitachi Construction Machinery (Europe) (HCME). One of the first machines put to work was a ZX250LC-5 working for Trafikk & Anlegg AS on the E18 road construction project between Sandefjord and Tønsberg in Norway. Andres Sœtre has 30 yea
    Read More
  • Hitachi develops tough machine for underground use
    February 22, 2016
    Hitachi says that its new ZX135US-5 SRF excavator is a tough and durable machine designed for safe working in difficult conditions. This robust excavator is designed with a short tailswing that allows it to work in tight spaces. Meanwhile it also has a short stick and boom made from heavy duty steel. The machine is more compact than a conventional excavator and suits use in tunnelling projects. It can be lowered into position on sites below ground level using a crane and has lifting brackets provided as sta
    Read More
  • Hitachi develops tough machine for underground use
    January 6, 2017
    Hitachi says that its new ZX135US-5 SRF excavator is a tough and durable machine designed for safe working in difficult conditions. This robust excavator is designed with a short tailswing that allows it to work in tight spaces. Meanwhile it also has a short stick and boom made from heavy duty steel. The machine is more compact than a conventional excavator and suits use in tunnelling projects. It can be lowered into position on sites below ground level using a crane and has lifting brackets provided as sta
    Read More
  • Roadtec machines deliver Alaska runway rebuild
    January 26, 2017
    A challenging airport runway project in Alaska has been carried out with the help of Roadtec construction equipment equipped with Topcon machine control systems. Anchorage-based Knik Construction carried out the work at the airport in Yakutat, located in the southeast corner of Alaska. Bounded by the Gulf of Alaska to the South, mountains to the North, and coastal glaciers to the East and West, Yakutat is remote even for Alaska. There are no roads leading in or out and all commerce and access is by air o
    Read More

Highlighted Content