New Caterpillar K Series Wheeled Loaders

Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard Cat 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shut
March 12, 2014 Read time: 3 mins
The new Cat K Series small wheeled loaders are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools
178 Caterpillar’s new design K Series Small Wheeled Loaders—924K, 930K and 938K— incorporate, for low regulated countries, a new EU Stage 111A/US EPA Tier 3 standard CAT 7.1 ACERT engine said to deliver up to 25% fuel savings compared with H Series models. An improved fuel filtration system features a dual fuel filter with increased dirt holding capacity for longer life. The C7.1 ACERT rated speed setting of 1800rpm, compared with 2415rpm for the H Series, also reduces sound levels and wear. An engine-idle shutdown system further reduces fuel consumption.

The new K Series models are equipped with a stepless, four-range, hydrostatic drive system that allows independent control of ground speed and engine speed for efficient operation of hydraulically powered work tools. A new creeper control feature is said by CAT to further improve low speed operations by allowing the operator to adjust maximum ground speed down to 1.6km/h.  An operator-controlled rimpull-control system helps reduce wheel spin and consequent tyre wear, and a front differential lock enhances traction.

The models’ dedicated load-sensing, variable-displacement pumps for the implement and steering systems reduce kilowatt draw for fuel efficiency and improve multifunction performance. The new K Series loaders also incorporate an electronic snubbing feature at end stroke and kick out positions to reduce operating stress. Hydraulic filter service intervals are extended to 2,000 hours.

Optimised Z-bar loader linkage available on the 924K, 930K and 938K is said by CAT to blend the breakout power of Z-bar linkage with the parallel-lift and load-handling characteristics of CAT VersaLink or IT (Integrated Toolcarrier) linkage. The new linkage, available in both standard- and high-lift configurations on the 930K and 938K, accepts pin-on tools, CAT Fusion coupler or a coupler that meets ISO 23727 and is compatible with competitive work tools. The new linkage is designed to work with CAT Performance Series buckets, designed for efficient loading, high fill factors, improved material retention and lowered fuel consumption. The 13tonne 924K, the 14tonne 930K and 16tonne 938K Wheeled Loaders have 2.5m³, 2.7m³ and 3.2m³ bucket capacities respectively.

An all-new operator's station on the K Series models features automatic temperature control, curved front windshield, tilt and telescoping steering column, and a Soft Touch control panel. Kick-out functions for boom lift, boom lower and tilt are standard and easily programmable by pushing and holding a button on the Soft Touch panel.
Earthmoving & soil compaction

For more information on companies in this article

Related Content

  • Caterpillar expands product range for China
    May 15, 2019
    Caterpillar has expanded its product range for the Chinese and emergent markets, with its own branded machines and also for its Chinese subsidiary, Shandong Engineering Machinery (SEM). Caterpillar has introduced three wheeled loaders for Chinese and emergent territory customers, with the 950 GC, 980L, and 982M models. Also new are the Next Generation 320 and 323 excavators, which benefit from a Smart Mode that automatically matches engine and hydraulic power to specific digging conditions, and an advanced
    Read More
  • Increased output, productive ADTs and excavators
    February 29, 2012
    Productive performers provide increased output for customers in the loading and hauling sector of the earthmoving market - Mike Woof writes. Loading and hauling machines play key roles in earthmoving operations, with the excavator and ADT combination proving both versatile and productive. While machines such as scrapers may be more efficient in specific earthmoving applications, these do not offer the versatility of the excavator and ADT combination, reducing utilisation.
    Read More
  • New tunnelling machines are coming to market
    May 13, 2015
    Major gains in tunnelling productivity and performance are claimed for a series of new machines now coming to market These new tools will help contractors boost productivity and versatility in an array of applications. The new equipment items are designed for a variety of tasks, including drilling and shotcreting duties. One of the leaders in the underground equipment sector, Atlas Copco, has a new line-up of single and twin boom drill rigs, which suit duties in smaller tunnelling applications. The fi
    Read More
  • Hitachi’s new high production ZX870LCH-5 excavator
    January 6, 2017
    With an operating weight of 83.8 – 86tonnes, Hitachi’s giant ZX870LCH-5 excavator is said to be built to operate on the most demanding job sites, such as large-scale construction projects and in busy quarries. The model incorporates the HIOS IIIB hydraulic system, said to allow for faster operation with lower fuel consumption and increased front speed. The ZX870LCH-5 is claimed to have 6% more productivity in H/P mode compared to the previous Zaxis model. Swing torque is also said to have increased by 9% an
    Read More

Highlighted Content